Indoor pollutants can cause health problems and disrupt HVAC system functioning.

BuildingGreen-Approved Filtration

BuildingGreen approves a variety of equipment, filters, and pre-filters that remove particulates and contaminants, minimize pressure drop, or reduce pollution from operations. Products include:

Has anyone used Insight for Revit to document the LEED Daylight Credit If so, would you recommend it?

Thanks,

_Ilana

Hi,

We have a market-rate housing highrise project that is going through VE right now: we need cheaper/lighter rainscreen claddings than precast concrete or GFRC.

If you've gone through this similar exercise, I would greatly appreciate recommendations for cladding manufacturers/products with EPDs available. We are open to metal... Read more

Reaching out to the collective knowledge here.  With interest in circular economy and building reuse growing, is anyone leading the charge for the concept of building reuse as a tool for maintaining community identity?  Has anyone seen successful projects with this concept in mind?  I was just in a discussion with a bunch of SDLers, and while... Read more

Dear Colleagues,

I proposed CarbonCure for a project and the structural engineer in the meeting was opposed to it. He later sent me detailed reasoning by email. I have not used this technology and would like to hear other more experienced opinions on the technology. The project we are working on is well integrated with climate, 99% sDA,... Read more

Happy Friday Everyone!

Hoping to add a bit of excitement to the end of your week: 

Here is the Sustainable Design Leaders 2020 Summer Summit Report. 

Enjoy!

RoseAnn for Nadav, Candace, and the BuildingGreen team

Hi all - Can you help me with a list of states with pending electrification/fossil fuel free ordinances? I am providing some technical aasistance for an article that is going to press soon. The author has listed WA, CO, and MA but I'm unsure how far each of these go and if it's technically correct to call them electrification ordinances.

The current Stantec/BuildingGreen featured topic is Resilient Design. Read on to learn the essentials, and then dive deep to earn CEUS.

Also see the Material Health featured topic, and also a survey of topics trending in Stantec’s regions.... Read more

Hi Gurus!

I'm desperately seeking any case studies (past/currently on the boards) of labs that have been designed without natural gas infrastructure (the topic I have to debate is about commercial spec labs but any lab case study, wet or dry, is welcomed). This is for a development authority that will be setting guidelines for new... Read more

Hi all,

Later today, we will be delivering the BITuser development site ready for content input. Andrea has created instructions to help get you started.

We would like to set up a few editor profiles for you. Could you let us know who should have a profile for content management? We need first and last name and an email.

... Read more

Welcome to the quiz portion of Innovative Products and Technology from the Greenbuild Expo

Learning Objectives
Upon completing this course, participants will be able to:


1. Direct attention to green building products and technologies that show exceptional potential, from a whole-systems perspective, to bring the... Read more

Products & Materials Specialist and LEED AP BD+C Brent Ehrlich excels at deep, unbiased, and nuanced technical research on the health and environmental impacts of green building products and materials. Some areas of focus include:

product and material constituents, including their risks

product certifications

... Read more

I am putting together a presentation for our local AIA conference specifically about shading devices / dynamic glazing / dynamic shading and wonder whether any of you have experience / feedback from projects that used a dynamic system - exterior operable shading or dynamic glazing (like View, Sage).  Any post-construction / post occupancy... Read more

I wanted to alert you to this opportunity to help develop a new ASHRAE Standard. They are especially looking for people who have not served with ASHRAE previously (aka the usual suspects)

ASHRAE Standard 242P, Standard Method for Calculation of Building Operational Greenhouse Gas Emissions

1 Purpose: This standard provides a... Read more

As many of you already know, Hanson Wade is starting a NEW conference this year on Advancing Construction Decarbonization. It is being held in-person July 19-21 in Denver, CO and looks to be a great program. 

The organizer of the conference contacted us to see if more SCL members might want to be speakers--so if you're interested in... Read more

Hi All,

The National Architectural Accrediting Board is currently undergoing review and revision of its “Conditions for Accreditation and Procedures for Accreditation.”

I recently attended the 2019 Reynolds Symposium: Education by Design, hosted by the University of Oregon in Portland. At the Symposium, a group of 100... Read more