Hello - 

I am looking for the recording and the PDF/ slides that were shared 3/6 for the project process share-out/ 5 min presentations. It was super inspiring and I would like to refresh my memory of some of what was shared. Thank you!

–
Alison Nash 
AIA, LEED AP ID+C, CPHC, WELL AP
Associate | Sustainability... Read more

Hello SDLs!

Here are presentations from last week's 2018 SDL Summer Summit Show & Tell Presentations.

Best,

RoseAnn

Hi Everyone - I hope this isn't a repeat topic. We are starting to get familiar with TallyCAT at SAR+ and have a few people testing our projects in it. Is anyone willing to help us troubleshoot or share lessons learned? We're running into a few errors and wonder if our Revit models and workflow are the issue, or if we need to be doing something... Read more

Hello, All!  We haven't run WBLCA on a project that may include electrochromic glazing before, and it's embodied carbon footprint is really high in comparison to a more traditional double or triple pane IGU (we thought it would be higher, but this is 3-4x higher).  The EPD we have from Sage Glass for their triple pane electrochromic lists a GWP... Read more

It is with the greatest pleasure that I announce to this esteemed group the recognition of our very own and much-loved leader Nadav Malin as an Honorary AIA member. AIA COTE had the honor to serve as Nadav's sponsor and we are pleased and delighted with this outcome (but not surprised of course.) For the record, "The AIA recognizes the notable... Read more

In a recent e-mail to BuildingGreen subscribers, Paula Melton pointed out that USGBC has opened the call for suggestions for LEED v5.

Every day, I encounter dripping skepticism from building owners about LEED for New Construction, because of the many many times that the fanciful outcomes of energy, water, and daylight models bear little ... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Hello Everybody,

I would like to invite you all to an event being hosted by the AIA Seattle COTE.  This is the next event in a series entitled Pathways to Decarbonization.  Date and time: May 13, 12:00pm - 1:00pm 

Description:  Universities are learning laboratories to explore and implement solutions to our greatest challenges... Read more

Welcome to the quiz portion of Choosing Insulation: High-Performance Wall Assemblies – Unit 3.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe key environmental and performance factors for insulation materials.
2. Recount bottom-line insulation material... Read more

They say that Louisianans are often late to the party but enjoy catching up.  The state, which had been stuck on ASHRAE 90.1-2007 (commercial) and IECC 2009 (residential) and has just adopted legislation jumping to IECC 2021 / IRC 2021, and commits to automatic upgrades with each 3-year code cycle.  This means we join CA, OR, WA, MA, and VT--... Read more

Hi folks,

No details have been sorted out yet, but I wanted everyone to have a heads-up that the SCL Steering Group is proposing that we graduate to a full, stand-alone SCL Summit in 2020. (Until now we’ve been squeezing our Summit into the day before Greenbuild, which is good in some ways, but problematic in others—and limits our time... Read more

As if you weren't worrying enough already, here's a little something that I ran across through monitoring activity on the American Society of Healthcare Engineers discussion boards:  https://www.id-hub.com/2018/10/17/hospital-plumbing-reservoir-resistance-interview-amy-mathers/, "Hospital Plumbing as a Reservoir for Resistance".  This is both a... Read more

Dear SLD-ers,

We have a project team considering the use of copper cladding for a high profile project in Vancouver. The preference is to use pure copper that is pre-patinated and does not have additional coatings.

We are attending a CEU from the Copper Development Association to understand options and environmental impact, but we... Read more

Hey all,

We have a NAVFAC project going into construction that has indicated that they'd like to hire someone to help them with the construction tracking aspects of the UFC requirements, including the Guiding Principles Assessment (GPA) program through GBCI. We're on the design side, so cannot offer these services on our own project;... Read more