Hi Everyone - I hope this isn't a repeat topic. We are starting to get familiar with TallyCAT at SAR+ and have a few people testing our projects in it. Is anyone willing to help us troubleshoot or share lessons learned? We're running into a few errors and wonder if our Revit models and workflow are the issue, or if we need to be doing something... Read more

Trista Little, Erika Duran, and Paula Melton

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Hi everyone,

As part of our monthly SDLS call yesterday, we looked through the 2020 SD Leaders Winter Summit Report. To help paint an even fuller picture of what was covered at that summit, here are slides from many of the 5-minute presentations.

As a note: we have permission from these presenters to share their slides within the... Read more

Hello, All!  I'm hoping for your help to keep a green roof on a project of ours.  We have a large healthcare project in the Midwest that is coming in over budget.  To avoid losing our extensive green roof, I'm looking for alternate sources of funding - grants, private sources, etc.  Has anyone gone down this path before and have shareable... Read more

I have reached out to the AIA staff members that I work with on the Energy Leadership Group (AIA ELG) to see about getting into the cycle of updating these standard documents.  Another member of the ELG, architect Kjell Anderson of LMN in Seattle, is interested in working with us on this effort, as he has started including Standard 209 language... Read more

Welcome to the quiz portion of Rethinking the All-Glass Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe eight reasons all-glass buildings are so popular in architecture today.
2. List the four elements Arup examined in their modeling of the effect of... Read more

Hey all,

We have a NAVFAC project going into construction that has indicated that they'd like to hire someone to help them with the construction tracking aspects of the UFC requirements, including the Guiding Principles Assessment (GPA) program through GBCI. We're on the design side, so cannot offer these services on our own project;... Read more

Has anyone completed an LCA for an engineering structures lab, particularly one that has a strong wall and strong floor? 

Welcome to the quiz portion of Introduction to WELL Certification: On-Demand Webcast.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Identify the Seven Concepts within WELL.

2.  Describe the differences between WELL and other frameworks such as LEED & Fitwel.

3.  List... Read more

Hi folks -

I was contacted last week by the producer of the documentary that launches this Thursday, 12/10 - he is hoping to generate interest among folks across the environmental spectrum (which of course includes all of us!) so I am sharing his pitch below with you all. The subject of water scarcity and drought is only going to... Read more

Hi everyone!

My awesome colleague, Paula Melton, is doing a short talk for USGC about mass timber and wants to know if there are SCLers in the group that can share their experience. In particular: 

"I’m wondering particularly about how supply-chain and cost issues are affecting availability and decision-making, and what the onsite... Read more

Currently not for sale, being updated and re-released in November 2021.

New Guide to Thermal Insulation Report

The BuildingGreen Guide to Insulation provides detailed guidance on insulation products and practices, including cost comparisons and detailed recommendations on what insulation to use, and what to avoid. It's a treasure... Read more

We have another great class of COTE Top Ten winners—congratulations to all of you with recognized projects. Join us on May 10 at 2:00 pm Eastern time for an inside peak at many of this year’s winners, along with insights from jurors. CLICK HERE TO REGISTER.

To keep things open and honest we won’t be recording this session. This “safe... Read more

It’s Summer Summit season! One of the “good problem to have” challenges we’ve had at recent SDL Summits has been too many great five-minute presentations. It’s hard to find time for them all. This year, since we’ll be online anyway, we can get a jump on that by starting the five-minute presentations early. Plus, we can share them across all the... Read more

Hi Fellow Design Professionals: It would be great if you could participate in this important research on the status of professionals addressing extreme heat.

Thanks.

MAL

Planning for Extreme Heat Survey

Our research team from the University of Arizona and Arizona State University is studying how planning... Read more