Hello Sustainable Design Leaders!

I have an exciting announcement today, fall Peer Network events are now open for registration! You can see all the event details and register here!

Based on feedback we received from past events and the most recent surveys, we decided against doing one long week of events for this fall and instead... Read more

We considering PV glazing for a project in SW Louisiana. Anyone have any successful PV glazing projects? Is this ready for primetime? 

Hello all,

We are having a mini office debate on fiberglass vs aluminum windows for use in schools (k-12) in Massachusetts. In the past we have always used aluminum windows on our schools, for durability. However, their performance is not as great as other products that are up and coming on the market. There is some hesitation to switch... Read more

I'm guessing this is the most impactful thing any of us could do over the next couple of years. Energy Codes are far and away the biggest lever that our industry has in fighting climate change. I'm up to my eyeballs in commitments at the moment but heartily encourage you (yes, YOU!) to sign up.

...

Hi all – if any of you are... Read more

Welcome to the quiz portion of Better Window Decisions: Mastering the Performance and Cost Options.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand the energy metrics that inform how windows affect energy loads
2. Describe ways to avoid air leakage and condensation... Read more

Hi all,

I had a position listed for a Sustainable Design Coordinator which we have down for the moment as we've taken on a fall intern instead. In the interim, however, I did have a couple of great candidates that I'd like to help find good matches. One of those candidates is Marissa Lantieri, see her resume and portolio attached.

Hi,

We have a market-rate housing highrise project that is going through VE right now: we need cheaper/lighter rainscreen claddings than precast concrete or GFRC.

If you've gone through this similar exercise, I would greatly appreciate recommendations for cladding manufacturers/products with EPDs available. We are open to metal... Read more

Is there a way for southface staff or guest experts to "pin" or "tag" the "right" answer in a forum question? It might be useful to designate the right answer and pin it to the top of a forum thread. I don't want the answer selected via crowd source but by staff or volunteers. Thanks.

Colleagues,

As we all know, ventilation rates must be kept the same between the LEED Baseline and proposed energy models. However, we're aware of projects that have been able to claim energy savings associated to reducing ventilation using systems like Aircuity. 

Have any of you successfully claimed credit for reduced airflow due... Read more

Many of today’s surface coatings are either too toxic or lack durability and require too much maintenance to be viable choices for commercial or heavy residential use.

BuildingGreen-Approved Coatings

Products approved by BuildingGreen meet California’s South Coast Air Quality Management District’s strict VOC limits. They also:... Read more

(posting here for Kira)

Sustainable Design Leaders:

Is your firm using the AIA COTE Top Ten Toolkit in some fashion? COTE would like to hear from you, especially if you are willing to share your story. 

Specifically, we'd like to share best practices and lessons about how it is working (with certain types of projects, at... Read more

Hello Gurus,

I’m writing to share with you an effort a small group of lighting designers from the Boston area started which is now rolling into a large scale effort.  We’ve put together a Lighting Advocacy Letter to accelerate the sustainability of lighting products. Inspired by the AIA Materials Pledge, the letter is intended to... Read more

As announced in last week's SDL/SCL Winter Summit, I have been working with a group of regional AEC professionals, industry stakeholders, and the New Buildings Institute on two code proposals to the 2021 Seattle Building Code that limit the Global Warming Potential (GWP) of concrete & steel in buildings over 50,000 sf (see attached).  We ... Read more

Pumpy Nullifidian

Greetings, colleagues!

Here's an opportunity for this community from AIA COTE Advocacy: US Congressman Paul Tonko (D-NY), Ranking Member of the Environment Subcommittee of the House Committee on Energy and Commerce, is looking for input from national stakeholder groups to help develop new federal climate legislation. Congressman Tonko... Read more

Hi all - Can you help me with a list of states with pending electrification/fossil fuel free ordinances? I am providing some technical aasistance for an article that is going to press soon. The author has listed WA, CO, and MA but I'm unsure how far each of these go and if it's technically correct to call them electrification ordinances.

I was sitting in on the USGBC's monthly Advocacy call this afternoon and heard about a state-local policy proposal to use property tax incentive for GHG reductions.  Through a state-local partnership, owners of existing residential and commercial buildings who invest in qualifying outcome-based improvements would receive a property tax... Read more