Welcome to the quiz portion of Innovative Products and Technology from the Greenbuild Expo

Learning Objectives
Upon completing this course, participants will be able to:


1. Direct attention to green building products and technologies that show exceptional potential, from a whole-systems perspective, to bring the... Read more

Greetings Gurus, following the AIA COTE Design for Economy concept, does anyone have a resource for a list of building efficiency ratio "targets" by space type? I've always struggled with this initiative. 

Hi all,

As discussed in our monthly meetings, we are assembling an industry push to expand the availability of embodied carbon data for MEP equipment. Our first steps are to send a letter to industry announcing a call to action and future educational webinars on the topic. In a similar manner as the electrification letter by the SMEP... Read more

Hello All,

A group of us (three architects and a builder- sounds like there should be a joke here) were debating this and we  are stumped.

Application: Residential exterior trim.

50 year warrantied composite product of agricultural byproduct with PVC (EPD not published yet) vs 100 year (if primed on all sides and painted or... Read more

I'm hoping someone knows the anser to this question. For the LEED ND certification the minimum requirement is "The LEED project should contain at least two habitable buildings and be no larger than 1500 acres." Does habitable mean buildings with dwelling units?

I'm loving the winning projects this year--congratulations to everyone who participated in making them so great! 

(In case you missed the announcement, here's our slideshow on BuildingGreen, and here are the winners with all the details on AIA.org)

Nadav

Hello Sustainable Advising Leaders!

We have another call coming up next Tuesday, March 17th at 1pm Eastern Time. Here is an agenda, Zoom call information is below.

We'll dive into getting to know each other better and also talk about the best path forward for this group.

Hope you can join us!

Jen

Join Zoom... Read more

Does anyone have an experience on recycling/reusing architectural glazing? We have a sizable glazing replacement project, and I am realizing how difficult it is to find a way to prevent the glazing from going into the landfill. So far, I have reached out to Terrazzo (aggregate) manufacturers, Glass Recycling Coalition, Architectural Glass... Read more

Hello Sustainability Leaders,

Great to see some of you at Greenbuild last week.  Thanks to all who responded to Nadav’s post-election blues post.  Lots of helpful insights and sentiments that left me very grateful to be part of this community.  On a related note, since the election I’ve been asked by people in our office and in life if... Read more

Hi SDL: sorry to send another missive so soon but I wanted all to be aware of a great new effort just announced today coming from Greg Kats and Vivian Loftness among others - The Smart Surfaces Coalition. This effort brings together resources and research around city-scale resilience. "The Coalition is committed to the rapid, cost-effective... Read more

I was wondering if any design or contractor friend here can kindly share the carbon emission factor of excavation during construction. 

I found a paper that provides energy use rate per cubic meter and associated carbon emission in kgCO2 for different phase of construction such as excavation earth work, pouring and lifting concrete,... Read more

This might be going down a rabbit hole, but in moving to California this year I noticed that "zero net energy" (ZNE) is the standard term, whereas "net zero energy" (NZE) was more common back east. The DOE's 2015 definition (below) uses "zero energy building" (ZEB), which to me implies a building uses no energy at all.

Regional... Read more

Hive mind,

We recently learned that 3M has discontinued the production of their 3M Daylight Redirecting Film (https://www.3m.com/3M/en_US/building-window-solutions-us/solutions/dayli...). This product was selected by an architecture client last year as the optimal daylight/glare control strategy for a school project, and we're assisting... Read more

I'd love to hear thoughts from the design, consulting, and contracting firms in this group about ways to make our specs more inclusive, or at least less exclusive to minority and women owned contractors and subcontractors and others that have not had the benefit of what a recent "Equity in Specs" presenter termed the "Fathers / Brothers / In-... Read more

For any of you who are already tracking your Scope 1, 2 & 3 emissions: Do you do so through a program (like the Carbon Disclosure Project) or do you have an in house excel file or ???? I'm looking for a good template and am open to suggestions.  Looking for what you like and what you find challenging.  Thank you.