Many of today’s surface coatings are either too toxic or lack durability and require too much maintenance to be viable choices for commercial or heavy residential use.

BuildingGreen-Approved Coatings

Products approved by BuildingGreen meet California’s South Coast Air Quality Management District’s strict VOC limits. They also:... Read more

Does anyone know where one can locate weather files (EPW) that has predicted future data for climate change?

Thanks in advance.

We should probably agree on the correct spelling for what we at BuildingGreen are calling "BITuser." I noticed that on the Salesforce portfolio screenshot provided by Dennis, it's spelled "BIT User."

BITuser has the advantage of more closely resembling LEEDuser, but it has the disadvantage of looking a little weird in all-caps, as in... Read more

Checking in to see if any of you have had good job site success with plastic water bottle recycling. Due to the LBC recycling requirements, we have to source separate onsite, and we're trying to has a separate plastics bin. For the most part, water bottles is going to be on of our biggest contributors.

Welcome to the quiz portion of Seal, Tape, Gasket: A Sticky Search for Better Materials.

Learning Objectives
Upon completing this course, participants will be able to:


1. Choose the best means of achieving barrier continuity for any given application.
2. Assess a joint sealant's service life and product... Read more

Hi Everyone, 

This is quite last minute (due tonight) but please see below for an opportunity to email comments to EPA supporting national building material reuse measurement/methodology. Submission is easy, just a short email supporting C&D/reuse and any other thoughts on what to include/exclude in material pathways for reuse beyond... Read more

Hi all,

We know preparations for Greenbuild are well underway for many of you. We also know that there will be many things competing for your time while you're there. Here's one more to consider! We don't have all the details solidified yet, but wanted you to know sooner rather than later for planning purposes.

We hope you’ll... Read more

I'm looking to compile an outdoor weather station for a local project, and we'd like to add local outdoor CO2 information to our data. I usually work with Onset HOBO products, but they don't offer an outdoor CO2 sensor. Their weather stations can take data from any CO2 sensor with an analog output - does anyone have any suggestions?

Under a high carbon scenario, most of North America will be 2 degrees C hotter by 2050. Meantime, we're designing buildings that will still be around in 2050, to codes that don't yet factor in chronic risks associated with climate change. I want to explain these risks to my colleagues; I'm hoping some of our green gurus can help answer the... Read more

Hello, fellow SDLs, 

I wanted to share an opportunity for you - or those in your network - to join a passionate team of architects and designers based in Anchorage, Alaska. I'm told that you'd be asked to join the full team in Anchorage a few times a year for team building events but otherwise you can WFW (work from wherever!).

I... Read more

Hello all,

I need future weather files for a project. We are looking at three years, 2050, 2075, and 2095 using two climate change scenarios, low emissions, and high emissions. I have seen ARUP's Weathershift site that uses RCP 8.5 and RCP 4.5. Are we assuming that 2.6 is not achievable? I would have used this as a low emissions scenario... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Water and air that penetrate building assemblies can damage materials, cause energy loss, and lead to mold, mildew, or other problems. The products used to address these may contain materials that are... Read more

Hi all - I heard from sevearl of you at Greenbuild that you have learned from and perhaps even shared the Path To Zero Carbon series internally at your firms and externally. As I mentioned at Greenbuild, we are attempting to hand off the series to a non-profit, with the idea that groups of experts (including many of you, I hope!) will provide... Read more

My name is Douglas Flandro. I am the sustainable design leader at CambridgeSeven in Cambridge, MA. I started my career in film and theater design. I moved into museum exhibit design with a graduate degree in interior architecture at the Rhode Island School of Design in 2003. I still design museum exhibits for science museums, nature visitor... Read more

Does anyone have a "healthy material" exterior bleacher benchtop (beyond natural wood or metal) recommendation for a public high school track and field? 

How do we discern between fiberglass, recycled plastic or HPDE?  Is there a rule of thumb on how to advocate for specifying a "not as bad" material? 

The project is in a coastal... Read more

Friends,

Through AIA work I have been working with Kim Shinn from TLC Engineering. Kim is involved on the ASHRAE 209 development and has been advocating that the AIA, ASHRAE and USGBC align around this standard. Personally I think this is a good idea as I expect that this standard could easily make it's way into regulations and contracts... Read more