HI All,

Really hoping to get some insight from all you wonderful people on how the Sustainability teams are set-up in your construction companies. As mentioned in my introduction post, I am the first ever Sustainability Engineer hired by my company.....until now all the work was handled by project teams. Which worked for them in the... Read more

I can hear Kjell saying "All models are wrong, but some are useful." Having said that we are having trouble getting usuable predictive energy use information from our electrical design engineer. They are telling us that their energy models are not for accurate pEUIs but just to compare various scenarios. Are they being lazy? Should we push for... Read more

Welcome to the quiz portion of "How to Access the Full Power of Biophilia."

Learning Objectives
Upon completing this course, participants will be able to:


Hi- Happy Monday!  

Does anyone know if there is an open-source list of manufacturers that have take-back programs? Looking for a summary/spreadsheet with details (costs, qty, etc). I have a small list but I'm guessing there is already one out there...

Also, Doesn't stage D in LCA account for take-back programs? Could this be... Read more

Hey all,

At the retreat, many of you spoke to me about wanting to learn more about our Foundations Resilience event in Houston in November. As it happens, our website just went live and I thought that I would share it with the whole group. Registration (for those interested) will be up and running very soon, but this should give you a... Read more

Hi everyone, 

Thank you so much to the SDL members who attended the Summer 2023 Summit! We had an amazing time with you there. A big thanks as well to the attendees who shared 5-minute presentations during the summit.

Below are some of the slides for the presentations. Please note that we have permission from all of these... Read more

Folks, would love to hear what software you're for in-house daylighting/energy performance modeling at the SD/DD level. My IT folks have been pushing us to try out Autodesk's Insight again after a not so impressive pilot we did a few years ago. Has it gotten better? Was it us? What programs do you feel good about? Which ones really make you mad... Read more

Hey team,

I'll go look to see who's in the MEP group, but does anyone in this circle have a northern California design engineer for institutional work that they'd particularly recommend? A group of folks we're engaged with is apparently having difficulty identifying a California-based MEP that everyone universally likes for high-... Read more

Hi All,

Polling the group to see if anyone has experience with Simergy - an e+ based modeling tool?

The tool appears to have features and integration with a lot of e+ plugins that make it attractive - but i haven't heard of its widespread use.

Is anyone successfully using Simergy?

Welcome to the quiz portion of EPDs Are the Future of the Building Industry, Whether You Like It or Not.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how environmental product declarations (EPDs) are made, what they tell you, and how they're best used.
2. Describe... Read more

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

We just heard from one of our more progressive clients that they are pulling Mohawk from their shelves and are no longer allowing it on their projects. Apparently there are some chemical ingredients they objected to, but more importantly the manufacturer "lied" to the client about the content. Does anyone have an idea what this might be about?... Read more

Team,

What are the M vs. E vs. P(FP) ratios of fee distribution you use in your company for a commercial office building?  How about a residential/hotel?

Best,

Luke Leung

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Hello Green Gurus,

Here is the information for August's Peer Networks Webinar, A more Mindful Future: mindful MATERIALs plans for Digital Transformation through the Common Materials Framework. We hope you will join us!

Register HERE

A more Mindful Future: mindful MATERIALs plans for Digital Transformation through the Common... Read more

Hi All,

USGBC MA is doing a study on the cost of net zero energy buildings in MA.  I’m wondering if you all have any data to share on plug loads in ZNE projects. I’m looking for single family res, 2-4 unit residential, +/- 60 unit residential, 10-12 story office, and k-12.  The engineers have presented initial results and their... Read more

Hello Everybody,

I would like to invite you all to an event being hosted by the AIA Seattle COTE.  This is the next event in a series entitled Pathways to Decarbonization.  Date and time: May 13, 12:00pm - 1:00pm 

Description:  Universities are learning laboratories to explore and implement solutions to our greatest challenges... Read more

Hey Team,

I'm in a Living Future session where a number of manufacturers are talking about the low uptake they're seeing in their take back programs. Contractor friends... What barriers (if any) are you running into in using take back programs? How might we as architects help increase utilization of these programs?

Aley