The Project StaSIO competition is in full swing, and its time to rate the submissions that made it to the public voting round!  Fancy yourself a connoisseur of simulation graphics and have a spare 5-10 minutes this Friday?  Take a browse through the gallery and rate the 10 graphics and 4 case studies that made it to the final round! Winners... Read more

Successfully managing the LEED documentation process requires specific knowledge, tools, and skills that are not covered in the LEED Reference Manual. This CEU course is based on the LEED Project Management course that GreenStep developed and teaches through UC–Berkeley Extension. It is designed for professionals who are somewhat familiar... Read more

Metal windows are used in commercial building because of their durability, low maintenance, and ability to handle wind loads.

BuildingGreen-Approved Windows

Metal windows must achieve an NFRC-certified unit U-factor of 0.20 or lower to be approved by BuildingGreen.

Manufacturers also must demonstrate that their highest-... Read more

Welcome to the quiz portion of LEDs: The Future is Here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Restate the energy efficiency and long service life of LEDs.
2. Describe basic LED components and how, when assembled, they perform differently than traditional light... Read more

I am looking for case studies/trying to identify buildings using concrete mixes with upwards of 30% replacement of cement by SCMs.  I've been in conversations with some structural engineers who are interested in lowering embodied carbon in upcoming projects, but would like to see examples of where this level of replacement has been successfully... Read more

Has anyone used Insight for Revit to document the LEED Daylight Credit If so, would you recommend it?

Thanks,

_Ilana

Question for you all: there is this wonderful graph showing how we can shift mechanical and electrical dollars into envelope investments to make deep energy savings cost-neutral. Have you experienced this on a project?

1-minute or less survey! (two questions, more detail if you want)

https://docs.google.com/forms/d/e/... Read more

Happy Friday, SDL!

We're running a Tally WBLCA for an environmental education center, which has a very small floor area but a fairly robust concrete/steel structure. Still, I was surprised to find an intensity of over 1,000 kgCO2/m2 for the building.

This is way higher than the general benchmarks I've found in the CLF's database,... Read more

Thank you for your interest in BuildingGreen

You will hear back from our customer support team in the next 24-48 hours.

Continue to home page »

Hello all,

Could any of you point me out to recent studies showing the health impacts of plastic piping vs. copper piping? 

We have a project where NIRON or Aquatherm are proposed as a VE item in lieu of copper.  I know there is some studies showing PEX and PVC piping health impacts, but I can't seem to find anything on these 2... Read more

Attached are the raw notes from the Design Process Conversations.

And here are the Guiding Questions from the Agenda Survey:

Design Process: how to intervene to get better outcomes?

How do I crack the nut of making a difference within my firm in the Design Process?

What strategies alter our fast-paced design... Read more

At the start of 2021 there was one signatory to the contractors commitment (thanks Leopardo!).  Today, there are 12 companies participating, representing over $24 Billion in total revenue.

We don’t always give ourselves enough credit or take enough time to savor our accomplishments because there is always more to do.  But, this is a big... Read more

I have been watching LEED Zero for a while, and have appreciated certain things, but one thing I think is an absolute disaster is their allowance of mainline RECs for claiming Zero Energy and Zero Carbon performance.  I just asked this question on the LEED Zero webinar, and the panelist basically said, "it's part of LEED Zero, therefore it is... Read more

Hi,

I have a colleague doing research on PCM in several projects. For context in their report, they were wondering if this group has seen any recent increase in application of PCMs in recent years. Is it just in ceilings or other applications? If so, what products are being used? They were having difficulty finding manufacturers other... Read more

I wanted to make sure that you didn’t miss this fun event.  We can all use some fun right now.

Built Environment Plus is celebrating the arrival of spring with a fun competition to get people out and about safely. A digital Scavenger Hunt will allow teams of 4 (or larger families) to complete a series of photo, video, and text missions... Read more

Hi all,

Later today, we will be delivering the BITuser development site ready for content input. Andrea has created instructions to help get you started.

We would like to set up a few editor profiles for you. Could you let us know who should have a profile for content management? We need first and last name and an email.

... Read more