Hi folks,

I'm looking into lower-carbon pipe options for HVAC and plumbing. The MEP 2040 has slides from a Buro Happold study in 2020 showing PEX to be much lower in embodied carbon than copper, which is unsurprising. CPVC is also a lower-carbon option.

But PVC has its issues and neither PVC nor PEX are recyclable (especially if... Read more

The ReUse Map created through the Material Flows Working Group is live and got some great traction at Greenbuild (Thank you Nadav and Barbara!).

To keep the map relevant and updated, we'll be looking at how to fund the maintenance of the map, the best ways to get the word out and looking at writing a white paper. If you want to be part... Read more

Hey SDL,

I'm curious if anybody out there has developed specification language requiring a certain level of airtightness (as assessed via one or a series of blower door tests) for a commercial project when it is not going for a Passive House certification and a blower door test is not required by code--basically, something in the... Read more

Has anyone heard about batu or cumaru as substitutes for ipe? I am looking for a durable deckling material, and would appreciate your recommendations for sustainable choices!

Does anyone have a Passive House detailing resource recommendation? Something that is applicable to wood over podium and/or metal framing construction? I have the book below but looking for something more applicable.

Passive House Details: Solutions for High-Performance Design 1st Edition

by Donald B. Corner (Author), Jan C.... Read more

Hi all,

We have a newly constructed, core/shell project having some hot water issues in the core restrooms.

There is a 0.35 Toto lav installed throughout. The hot water heaters are adjacent on each floor, located in the janitor closets. We did the math, and there could be a gallon of water standing and cooling in the pipe between... Read more

Design assemblies that live up to their potential Course developer Peter Yost explains how high-performance assemblies are fundamentally different from traditional building assemblies.

High-performance buildings integrate site-responsive orientation, climate-responsive form, hefty R-values, efficient mechanical systems, healthy... Read more

Hello - 

I am looking for the recording and the PDF/ slides that were shared 3/6 for the project process share-out/ 5 min presentations. It was super inspiring and I would like to refresh my memory of some of what was shared. Thank you!

–
Alison Nash 
AIA, LEED AP ID+C, CPHC, WELL AP
Associate | Sustainability... Read more

Welcome to the quiz portion of Five Reasons to Be Optimistic About Solar Energy!

Learning Objectives
Upon completing this course, participants will be able to:


Describe three ways how PV decreases environmental impact while increasing sustainability and health measures for communities.

Discuss PV life-cycle... Read more

Hello - I seem to remember a thread on Sustainable Design Specialist / Advisor - Focused or Integrated Position within a firm. Does anyone remember the subject header or did I just dream this up? My searches are coming up empty...

Thanks!

Mona

Mona Lemoine, Architect AIBC, MAA, MRAIC, LFA, LEED AP BD + C

Senior... Read more

There are a few spots left for the 2018 Summer Architecture + Design Sustainable Design Leaders Summit that is being held August 1-3 at the Garrison Institute in Garrison, NY (Easy train ride from NYC). If you have not already received an invitation, and you play a sustainability leader role - either formal or informal - in a mid-sized (>40... Read more

Hi all,

Just wanted to put a couple of useful webinars on your radars if you haven't heard of them yet:

#1: The Contractor’s Role in Quantifying and Reducing Embodied Carbon: Why, What and How

This webinar will provide an overview of what a contractor's role is towards embodied carbon reductions, and how two General... Read more

I wanted to make sure that everyone saw this.   Next Friday is a launch webinar for the Commitment.

Introducing the Contractor’s Commitment       November 13th, 2020          3pm - 3:30pm ET (12am - 12:30pm PT)

This webinar will mark the launch of the Contractor’s Commitment as a pilot program for 2021. We’ll give a brief overview... Read more

Dear Green Gurus,

I both regret and am excited to tell you that I am leaving this group to pursue my next adventure.  I'm stepping down as Kirksey's Director of Sustainability, moving to Tucson, and starting my own business.  My business plan is to buy existing buildings, renovate them to net zero, and then sell or rent them.

I... Read more

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more