Erika Heet is the Editor-in-Chief of BuildingGreen. She is the former Editor-in-Chief of Interiors magazine. She has held senior editor positions at Dwell and Architectural Digest, and is the author of two books on modern architecture. She has served on the boards of Greenbuild and the Sustainable Furnishings Council, as well as on juries for... Read more

Hi everyone!
I've seen a lot of claims over the years of living walls or planted buffers that can mitigate *outdoor* air pollution and have always assumed there's no real scientific basis for that idea, unless we're talking an actual forest that's 10s of feet thick. Am I wrong? Are there examples of living walls that actually have been... Read more

This just in from Berkeley Earth. The definitive report on 2023 global temperatures. Lots of incredible graphs to peruse but the news is pretty incredible. Actual temperatures far surpassed predictions. "At the start of 2023, we foresaw only a 14% chance that 2023 would become a record warm year, and only a ~1% chance that 2023 would reach 1.5... Read more

Hi SD Leaders,

As you may be aware, this past April a group of manufacturers calling themselves the Living Product 50 responded to the letters that many of us sent about five years ago advocating for transparency in their product ingredients.  A copy of that letter can be reviewed about midway through the page at this link:  https://... Read more

This article just came up in my news feed. I thought you’d all like to read it. I will point out that C&D-specific MRFs have told me that they are really good at single-stream C & D waste, as long as the drywall is pulled out.  Any drywall in a single-stream C & D dumpster ends up in the landfill. Drywall just breaks apart and gets... Read more

Welcome to the quiz portion of What Makes the Building Envelope Green? BuildingGreen’s Guide to Thermal & Moisture Protection Products.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe attributes of the greenest building envelope products.
2. Explain how to... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

Dear Esteemed colleagues: I was recently asked a good question in light of the impending (fingers crossed) passage of the reconciliation bill that will bring alot of funding to energy efficiency/decarbonization upgrades at the residential scale. The question is: What are the arguments/ scenarios about the importance for homeowners to contract... Read more

We are growing our Design Performance Group at NBBJ! We're looking for two special people right now: a senior sustainable material consultant and a senior energy analyst. Help us design the next generation of healthy, low impact buildings - this is a chance to impact across the scale of our global company and build a better future! Know anyone... Read more

Hi SDLers: ESG Investing is mushrooming which is a very good thing. AIA National, for example, just switched over to 100% ESG investments. With it, there seems to be a growing number of "ESG-lite" options. I'm wondering if anyone among this informed group has recommendations on how to determine a quality investment approach. I'd appreciate any... Read more

Churn and renovations can disrupt occupants, release or introduce indoor pollutants, and increase the embodied footprint of a building.

BuildingGreen-Approved Partitions

Movable partition systems allow spaces to be easily reconfigured, reducing costs and environmental impact. BuildingGreen approves partitions and panels that have... Read more

Now available on demand

As more and more architects, designers, contractors and owners demand transparency surrounding human health impacts in the built environment, manufacturers need short cuts and tools to meet the call of this demand.

This webinar is intended to educate manufacturers about the market demands for creating... Read more

All,

The current version of the program manual includes ID numbers for the best practices, as shown below. I know we want to keep a quick reference number or ID, but though it would be worth asking if we want to use the below, reorder them in some way, or use a different kind of ID. Opinions?

Thanks,
Jenny

--------... Read more

Hi folks,

We had a fun impromptu conversation on our call last week. We got most involved in the challenge of getting developers interested in taking advantage of IRA Tax Credits. That can be quite a challenge given their business model.

We also heard about emerging data on tradeoffs between embodied and operating carbon, and how... Read more

Hello all, 

Wondering if anyone has experience with lead limits in electrical cable and wiring? 

LEED for Healthcare allows a limit of 300 ppm of lead in electrical wire and cabling - my search for compliant products has been all dead ends. (MRc PBT Source Reduction - lead, cadmium, and copper)

Acceptable regulations for... Read more

Hello all, 

Any Fitwel experts out there? I have a 30,000 sf boutique hotel + spa client who would like to certify under the Fitwel rating system but Fitwel folks are telling me that no scorecard is currently available to hotel clients (can't use mulit-tenant or resi, that a hotel scorecard is under development). Has anyone used Fitwel... Read more