Forum topic
On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more
Forum topic
Hello,
We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more
Forum topic
WELL & Fitwel and beyond.
Guiding Questions:
Is this a luxury item? What experiences are people having with these? How do we utilize Health & Wellness based strategies/thresholds in our design approach without going for a certification? How does this apply to our work? Which program has been more broadly adopted? and why? I... Read moreQuiz
Welcome to the quiz portion of The BuildingGreen Guide to Insulation!
Learning Objectives
Upon completing this course, participants will be able to:
1. Discuss how insulation works to increase the energy efficiency and environmental sustainability of buildings;
2. Explain why certain materials make more sense than... Read more
Forum topic
Hello SDL!
Has anyone set "Ecosystem Benefits/Service" targets for an individual project or for all their projects? I was previously against the idea of even measuring ecosystem benefits but I've had my mind changed in recent months!
Currently we want to set a target for every project to: "Improve ecosystem benefits on every site... Read more
Product Guide
CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.
Rainwater capture is increasingly important as shortages put pressure on our water systems.
BuildingGreen-Approved Rainwater Harvesting
We approve a wide range of rainwater catchment and storage systems and components, with... Read more
Forum topic
Hello Everyone,
Here are some of the Show & Tell presentations from the 2019 SDL Winter Summit, enjoy!!
Best,
RoseAnn
Forum topic
We are pursuing sustainability goals (and documentation of those goals) outside of any certification/rating system for a current project. However, we have set up a criteria list of goals by following strategies/credits from many of those systems (LEED v4 EPDs, SITES v2 threatened tree species, WELL v2 mindful eating, etc.). This approach is... Read more
Forum topic
Hi Fellow SDLers: I'm writing to share intel about two recent climate change articles that provide links to some great new resources:
1. From the AIA Trust: An excellent article in this month's AIA Trust Newsletter on "Climate Impact on Professional Liability." This includes links to some useful resources including the new AIA Hazard and... Read more
Forum topic
Greetings friends.
Many of you have heard about the CARE Tool, (formerly the 2Build or not 2Build Carbon Calculator.) We are now in the final stages of bringing it online as a free, open access tool hosted by Architecture 2030. We are finalizing and aligning data and working with a web developer (the same one that brought us... Read more
Quiz
Welcome to the quiz portion of Video: Insights to Success on LEED-CI Certification.
Learning Objectives
Upon completing this course, participants will be able to:
1. Identify key changes to LEED CI 2009 (ID+C).
2. Identify the circumstances of a LEED-CI project that challenge the abilityto certify.
3.... Read more
Forum topic
Does anyone know of a source for finding the operational solid waste generated by typical building/use types (weight/sf)? I couldn't find anything on LEED, True, or EPA. I found this table but isn't by sq ft for many of hte uses. Waste Generated by Industry and Building Type (wastecare.com)
Forum topic
Friends,
We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing. For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).
I came across this research paper several years ago, but... Read more
Forum topic
Friends, I reviewed the firm's 2019 AIA 2030 data with a Principal, having organized the data in such a way that we could manipulate it. I included the average EUI and weighted EUI, since the latter gives a truer picture of where we are as a studio. In the past, the assumption was we would raise all boats with efforts to improve our practice in... Read more
Forum topic
There has been some great press in the last couple of days related to Healthy Building Network's (HBN) newly released report "Chlorine & Building Materials Project". That report is over 200 pages long, but there is some great commentary available that makes the top issues much quicker to grasp.
Chlorine is used to make PVC and PVC... Read more