Hi everyone, it was so great to meet some of you at the winter summit and finally connect names with faces!

We have a project that is targeting CalGreen Tier 2 and LEEDv4 Platinum.  Thought I'd reach out to see if anyone on this forum has found comparison guides between the two?  Looking for something similar to this CalGreen 2013 tier... Read more

Wondering if we can have a dialog on HVAC load calculation software... we are currently still using Trane Trace 700, but with the future migration to Trace 3D+ coming are looking into other options. Never used HAP but I haven't heard great things, and we dabbled in IES VE for a while, but went back to Trace since at that time there was no... Read more

I was recently asked if there is a way to quantify financially what one MT eCO2 might be worth in the context of a building owner reducing their own carbon emissions.  How do you put a dollar value on those reductions?  Does anyone have experience with that or can you point me to the correct resource to answer this question?

I read a very misleading article on the AIA's website today regarding antimicrobials and the benefit of microbicidals in paint. It was written by a manufacturer, not a healthcare professional, and was not obviously labeled as sponsored content on the website. (I received the link in an email, which did label it as such).

https://www.aia.... Read more

Hi folks,

I’m sorry to be so last minute with this. LEED v5’s second public comment period ends TOMORROW (Monday, Oct 28). As it currently stands, LEED has eliminated its preferential support for FSC over other forest certification programs and is silent on climate-smart forestry.

I’m hoping that the Climate Smart folks in this... Read more

Hi GGs,

We are looking to do a renovation of a very leaky old office space, and we want to get a good snapshot of air quality and effective envelope R values both before and after.

Does anyone have experience with:

1. installing heat flux sensors on windows and walls

2. deploying IAQ measurement devices that can log... Read more

FILTER BY NETWORK

FILTER BY REGION

Team,

You probably know on July 9th, WHO issued a document and agreed aerosol route of COVID-19 transmission is possible, but fell short of saying we need to make provisions in our buildings for it per the "Do no harm" principle.  Mary Ann Lazarus, Pauline Souza, Kay Sargent, Joyce Lee, and I (SDL members from architecture and... Read more

Chillers are part of larger systems that provide cooling in large commercial buildings.

BuildingGreen-Approved Water Chillers

Because there isn't a single relevant efficiency standard for chillers, approved products use innovations such as magnetic bearings, variable frequency drives, or other technologies that significantly... Read more

Hi, all - 

Thanks to many folks who connected on the heels of our last matchmaking post. Reaching out on behalf of a former SDL member, Lindsey Perez, to relay an opportunity from MIRACORP linked below: 

https://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=97753&clientkey=957B67314D085A633E5C9C5568F3BC04 

We're expanding the capacity of our team, with two positions, a general project sustainability specialist as well as a more targeted position focused on the healthcare sector.

Healthcare Sustainability Specialist

Sustainability Specialist

In both cases, we're looking for smart, experienced people who understand the power... Read more

I wanted to alert you to this opportunity to help develop a new ASHRAE Standard. They are especially looking for people who have not served with ASHRAE previously (aka the usual suspects)

ASHRAE Standard 242P, Standard Method for Calculation of Building Operational Greenhouse Gas Emissions

1 Purpose: This standard provides a... Read more

Hello Green Gurus,

Here is the information for this month's Peer Networks Webinar, Adapting the Construction Process for Passive House. We hope you will join us!

Register HERE.

Adapting the Construction Process for Passive House
Wednesday, April 28th, 2021
2pm - 3pm ET (11am - 12pm PT)

Description
... Read more

Welcome to the quiz portion of When Passive House Goes Big!

Learning Objectives
Upon completing this course, participants will be able to:


Evaluate the main barriers to achieving the Passive House Standard on a large, urban project.

Identify design strategies for successfully and cost-effectively achieving the... Read more

Hi all,

Here's a good follow up to Maria's steel question on Monday.  We have a Midwest project that unfortunately (from a carbon perspective) is required to use a traditional, thick precast facade.  We’re working with the contractor and potential future (not yet bid out) fabricators to determine an appropriate % of pozzolanic material... Read more

Curious what people's 'best' experiences or recommendations are for load calculations and energy modeling regarding electrochromic glazing... hoping I can lean on others as it's just now becoming more of a talking point in our market here in Omaha. 

Specific questions including whether load and energy modeling software are separate (... Read more