Does anyone here have a draft spec for low embodied carbon concrete they could share? I see the GSA has a standards sheet with MGWP limits, but we are hoping to actually specify the mix for upcoming projects.

Hi All - as Environmental, Social and Governance (ESG) becomes increasingly prevalent, I'm trying to learn more about what types of requests for ESG-related information folks are actually receiving and what types of trainings on ESG would be most helpful.  Drilling down a bit, I'm curious as to how ESG data points are moving down the supply... Read more

Hi all,

I'm sure many (most? all?) of us have heard the changes to LEEDv4's energy standard are coming. If this is news to you, info on the balloted measures that have passed is available online here: https://www.usgbc.org/articles/leed-v4-energy-update-approved-member-ballot.

My question to MEP friends in the Green Commons: In... Read more

The Center for the Built Environment (CBE) at the University of California, Berkeley is conducting a survey to understand current practices and outlooks among design practitioners: architects, engineers, energy modelers, and related professionals. Our goal with this work is to improve climate change adaptation guidelines that support building... Read more

For my first test post I'm going to be completely boring and ask about logistics.

If we know of someone that should be part of this forum, how do we invite them? There were a couple of people that I thought were on the Wiggio who I recently found out were not. There may also be folks from our regional groups who may not have been part... Read more

I'm curious if anyone can share their strategy on indoor air quality for the return to office. Is this something that is prioritized at your firm from a wellbeing standpoint and with the current health crisis at hand? Lendlease is looking into options to safeguard our employees/occupants as we move back into the workplace and I'm researching... Read more

Colleagues,

As we all know, ventilation rates must be kept the same between the LEED Baseline and proposed energy models. However, we're aware of projects that have been able to claim energy savings associated to reducing ventilation using systems like Aircuity. 

Have any of you successfully claimed credit for reduced airflow due... Read more

All--

A few months ago, I sent around a note about an article I was writing about the state of post-occupancy studies. It finally came out, in the latest issue of Metropolis. Great quotes and work from Payette, EDR, KieranTimberlake, HKS, and others. Thanks to all for helping with this.

I don't believe it's available online yet,... Read more

I'm guessing this is the most impactful thing any of us could do over the next couple of years. Energy Codes are far and away the biggest lever that our industry has in fighting climate change. I'm up to my eyeballs in commitments at the moment but heartily encourage you (yes, YOU!) to sign up.

...

Hi all – if any of you are... Read more

As announced in last week's SDL/SCL Winter Summit, I have been working with a group of regional AEC professionals, industry stakeholders, and the New Buildings Institute on two code proposals to the 2021 Seattle Building Code that limit the Global Warming Potential (GWP) of concrete & steel in buildings over 50,000 sf (see attached).  We ... Read more

I am getting started on a research project to evaluate the feasibility, costs, and benefits of using phase change material (PCM) to passively regulate temperature in Minnesota buildings. If anyone has experience designing with PCM, installing PCM, or occupying buildings with PCM, can you share any lessons learned that would be relevant as... Read more

Little things make a big difference in MEP systems. Pumps, fans, ducts, and dampers are at the heart of performance.

BuildingGreen-Approved HVAC Accessories

We approve the best-in-class products in each category, including:

Welcome to the quiz portion of Choosing Insulation: High-Performance Foundation & Basement Assemblies – Unit 2.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the insulating performance and durability of different insulation materials.
2. Provide examples of... Read more

Team,

After talking to UL today, I thought it will be good for them to do a presentation on what they see in embodied energy/carbon road map of MEP equipment can be like.

Should we schedule them for a 30 minutes presentation in the next call?

Best,

LL