Well done and rivhly deserved, brother.  That makes you a Fellow Squared.

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Hello Green Gurus,

Here is the information for August's Peer Networks Webinar, A more Mindful Future: mindful MATERIALs plans for Digital Transformation through the Common Materials Framework. We hope you will join us!

Register HERE

A more Mindful Future: mindful MATERIALs plans for Digital Transformation through the Common... Read more

I am looking at having staff members take a materials course and deciding between Parsons Healthier Materials and AIA Materials Matter certificate programs. Does anyone have feedback on either? Bonus points if you know about both and can provide a direct comparison. Thanks!

All - 

We have corporate clients that are starting to request antimicrobials in response to Covid-19. I assume we are not the only ones seeing an increase in these requests. Knowing that the evidence supporting antimicrobials has limited to no efficacy, how are you approaching these conversations? We want to continue to advise based on... Read more

Welcome to the quiz portion of Whole-Building LCA Tools for LEED v4 and v4.1.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Understand the basic goals of whole-building life-cycle assessment, including how it can improve environmental performance and contribute to credit achievement in... Read more

As I mentioned in my five-minute presentation this morning and then discussed a little more in the break-out on RELi that followed, the full RELi Rating System, in its current form, has now been posted online: http://anyflip.com/zyqc/mdir/

Unfortunately, this is only posted as a flipbook, currently (viewable online only), and isn't... Read more

Though BuildingGreen has long supported the use of electric hand dryers as a more environmentally friendly hand drying option, the majority of evidence appears to support paper towels as a preferred method of controlling the spread of potential pathogens. 

And even the most efficient hand dryers contribute significant CO2 to the... Read more

For a number of years a colleague and I have been teaching a course about sustainability and water in architecture at the University of Pennsylvania's architectural school (PennDesign).  This year we're hoping to bring a few new opinions to the table for at the same time as we broaden the discussion.  Because the class will be virtual again... Read more

Hi Sages,

We had a great conversation in yesterday's Sages meeting. We took the long list of ideas that we brainstormed last month and in our March poll when thinking about what we could/should focus on as a group and we did some refining and prioritizing using dot-voting in Miro (once we got the voting technology figured out!). Notes... Read more

Welcome to the quiz portion of Waste Water, Want Water.

Learning Objectives
Upon completing this course, participants will be able to:


1. Help clients make sound, holistic decisions about wastewater that take into account site, municipal infrastructure, energy goals, occupant needs, and maintenance considerations.... Read more

Greetings!

Ayers Saint Gross is in search of a Sustainable Design Coordinator to join our team. This person is anticipated to sit in any one of our offices - Baltimore; Washington, DC; Tempe, Arizona; or Austin, Texas. Fit and skillset are more important than geography. The position is anticipated as full-time, but if the right candidate... Read more

I received the following email from Naajia at Southface.  I'll be out of town until November 8, but I'll see if there's time for me to address at least the second part before I leave:

A question regarding the BIT-User Forum was brought to my attention by a participant. Apparently when you are posting a question and you pick your location... Read more

Hello SAL Members - after last month's call, and invitation to do some thinking around the direction of the group, a few of us connected and brainstormed questions that might help guide and refine our network. It would be great to have a conversation around everyone's needs and goals, so if you could please take 5 minutes to respond to these... Read more

I can hear Kjell saying "All models are wrong, but some are useful." Having said that we are having trouble getting usuable predictive energy use information from our electrical design engineer. They are telling us that their energy models are not for accurate pEUIs but just to compare various scenarios. Are they being lazy? Should we push for... Read more