Has anyone here found an alternative to XPS for the void former?

A structural engineering contact was included in recent conversations about embodied carbon in insulation materials and brought to our attention that this is a common use for XPS that has nothing to do with its insulating properties. It is typically used where concrete is... Read more

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Hey All!

One of the initiatives from our first meeting in Chicago was to gather and develop resources related to plug and process loads in buildings which will help us all with: energy modeling, equipment sizing and power distribution.  We had our first call this morning and are rolling.  Aspirations are that this could turn into a... Read more

Hi Green Gurus,

In this stressful time, I think it is important for us to continue to feel connected and supported.  Also, it is difficult to come to terms with the reality of what is happening.  So, I thought it would be helpful for us to share some information about the response of our respective firms to the Coronavirus.

The... Read more

My apologies if I posted this question twice ont he forum - I am a newbie on this forum.

Anyone knows how to import an structural emobdied carbon project file into architectural project file of the same proejct to generate a combined Sankey graph?  My Building Transparency/CLF contacts haven't got back to me for a week now...

... Read more

Hi all,

I had a position listed for a Sustainable Design Coordinator which we have down for the moment as we've taken on a fall intern instead. In the interim, however, I did have a couple of great candidates that I'd like to help find good matches. One of those candidates is Marissa Lantieri, see her resume and portolio attached.

You know all those times when you want to reply privately to someone, but don't have their email address handy? What a pain, right? 

Not anymore! Now you can go to the "Group Members" tab on the BuildingGreen Communities forum page, and hover over anyone's name to see their email address. 

Only members of the forum can see your... Read more

I am looking for case studies/trying to identify buildings using concrete mixes with upwards of 30% replacement of cement by SCMs.  I've been in conversations with some structural engineers who are interested in lowering embodied carbon in upcoming projects, but would like to see examples of where this level of replacement has been successfully... Read more

Do any of you have experience with Design For Freedom yet? It came to my attention and I'm trying to investigate. I would love to hear feedback and experiences that you may have at this point. It seems like an opportune moment for this issue of forced labor (yikes! so much I don't know...) to come to the forefront, and I'm curious to hear how... Read more

Hello Sustainable Design Leaders!

Here at BuildingGreen we are excited and looking forward to creating a valuable and engaging online summit with you all for 2020!

You can Register HERE as well as review important information.

The Summit will happen throughout the week of July 13. The specific meeting times are: 

3:... Read more

Welcome to the quiz portion of Green Building Product Certifications: Getting What You Need.

Learning Objectives
Upon completing this course, participants will be able to:


1. Differentiate between a standard and a certification.
2. Describe "greenwashing" and list at least two ways to spot it.
3.... Read more

Hi folks,

There was a lot of interest on the call yesterday in the article that Kim showed from a host of leading IAQ experts. I was not able to find a legal way to get a copy that we can share, so if you want it I think it would be appropriate to either pay the $30 for the article (one-day access ??) or $79 for a one-year AAAS... Read more

Hello All,
Checking in on experience with Armstrong's Tectum E-N with NEOPOR Graphite polysytrene GPS rigid foam insulation core in roof panels for exposed structure?
BASF says that NEOPOR uses up to 30% less material than other rigid foam; it is greenguard gold cerified. 

Interesting that the NEOPOR increases in R-value as... Read more

Sign up now to roll up your sleeves and have fun solving real problems! April 28 from 3-5pm ET

DESIGNING FOR DECONSTRUCTION

Building deconstruction, or disassembly, is a critical strategy for carbon reduction, minimizing waste & contributing to a circular economy, yet remains a serious challenge for many reasons.

Many... Read more

Following my retirement from BuildingGreen, I’m also looking to retire from the nonprofit Resilient Design Institute, which I’ve been leading since 2012. My default plan is to sunset the organization in the fall of 2024, but I wanted to offer the idea of someone (or multiple people) taking over the organization.

RDI is incorporated as a... Read more

There are a variety of products and practices that contribute to environmentally friendly landscaping.

BuildingGreen-Approved Landscaping Products
Edging

BuildingGreen approves products with recycled content or other environmental benefits.

Erosion Protection

Natural-fiber erosion protection options include... Read more

Our fledgling group had an organizing call last Tuesday, March 17th. Of course, it was a great conversation - the group is full of amazing people! The focus of our conversation was the goals and actions that should drive this group forward. I have a few ideas. Please share your own in this thread!

I start from the belief that we see our... Read more