Whether you’re attending Greenbuild 2024 or live near the Philadelphia area, join us for BuildingGreen’s annual Greenbuild Show & Tell! The event will take place from 6:30-9:00 pm on Tuesday, November 12th at Jacobs, with the first hour for socializing and the 5-minute presentations starting at 7:30pm. Light refreshments and beverages will... Read more

Hello - I wanted to see if others have been having any of the same Windows security issues with a host of public software (Radiance, Window, DAYSIM, Open Studio) that we regularly use for performance analysis.

My IT team has let me know that they see serious security conflicts with THERM, as well as lot of the LBNL software (Radiance,... Read more

For those who haven't heard yet, we've reached a critical milestone with the Contractor Commitment. 51% of the SCL network voted to approve the language of the current draft. That's the mark we needed to hit, so we can move forward with planning the launch! Thank you to all those who have worked tirelessly over the last two years developing... Read more

Green Gurus –

Clark Brockman brought to our attention an important and impactful opportunity to advance building decarbonization through the US Department of Energy’s proposed rulemaking around water heater efficiency, advancing adoption of heat pumps, while still providing exceptions (and efficiency targets) for electric or natural gas... Read more

Can anyone recommend waste haulers and processing facilities that are LEED compliant for processing commingled waste in the DC / MD area?

I know this is the Sustainable Construction Leaders and not the LEED Construction Leaders, but with waste management being such a big part of what we do, I wanted to crowd source a request for help.... Read more

Some of us SDLers saw a need to create an online repository for the best simulation graphics and created IBPSA Project Stasio over the last couple of years. Along side graphics is a list of simulation questions (in progress) that we as architects may not know we could ask. The graphics are linked to answer the questions so our simulation... Read more

Hello All,

Through a regional School of Architecture, our firm has been connected with a very intriguing startup that has been engineering a new rooftop wind energy technology. They are developing a system to economically capture the increased wind flows at the edges of commercial building rooftops. They have engineered this system,... Read more

Hello Green Gurus,

Here is the information for this month's Peer Networks Webinar, Jobsite Sustainability Tracking Tools. We hope you will join us!

Register HERE.

Jobsite Sustainability Tracking Tools
Tuesday, May 18th, 2021
2pm - 3pm ET (11am - 12pm PT)

Description

‘You can’t improve what you don’... Read more

Welcome to the quiz portion of Deep Material Vetting (That Won't Chew Through Your Design Budget).

Learning Objectives
Upon completing this course, participants will be able to:


1. Align product vetting with goals that aim to mitigate occupant exposure and environmental toxicity.
2. Foster partnerships with... Read more

In the Passive House session at the Winter Summit, I spoke about a Massachusetts DOER report that found that meeting the new energy code in MA (passive house or better in most cases) is cheaper for some building types than traditional construction. Some of you asked to see the report. It was a power point show. On page 34 of this slide deck... Read more

I am excited to announce that BuildingTransparency.org just launched downloadable specs and associated guidance that a couple of us have been working on for a few months.  Here is the EC3 announement:

Wood was the first material used in window frame and sash construction, and it remains popular for homes with its warm feel and relatively high energy efficiency.

BuildingGreen-Approved Windows

Wood windows must achieve an NFRC-certified unit U-factor of 0.22 or lower. Manufacturers also must demonstrate that their highest-... Read more

Has anyone found/used a non-PVC peel-and-stick countertop film?  Working with a client on a corporate renovation, and while we've been able to find a non-PVC product for the kitchen cabinets, I can't seem to find one that works for horizontal surfaces.  And they're looking for a cost-effective and quick-turnaround solution so don't want to... Read more

Avoiding Toxic Chemicals in Commercial Building Projects

We’re excited to issue our special report, Spec This, Not That.

In updating the report in 2020, we engaged a respected toxicology and regulatory-compliance firm to review and assist in our revision of the entire publication. This edition reflects the latest science in... Read more

Hi all, we're looking for a West Coast Regional Sustainability Specialist if you know of anyone who might be interested! They would be part of our amazing firmwide Sustainability team, and could potentially be based out of LA, Costa Mesa, San Francisco, Oakland, or Seattle. Please reach out if you know of anyone who might be a good fit, I'm... Read more

Posting at the request of Sara Bayer of Magnusson Architecture and Planning, who will soon join this group:

"In our quest to achieve Passive House EUI levels in all of our multifamily projects in a healthy manner, we are encountering pushback on the one item that is not really code min just yet (in NYC) and adds real cost:  ERV’s.  Our... Read more