Have any of you heard of anyone ever using phase change material (PCM) "movable partitions" as a resiliency strategy to mitigate indoor overheating during a heat wave in passive buildings? You'd keep them stored in a basement or cool room, and deploy them into habitable spaces during the heat wave to keep the space cooler than the exterior... Read more

I'm writing an article surveying and comparing various embodied carbon tools, including whole-building LCA tools. I'm looking for interviewees who have used at least TWO of the three major LCA tools currently in use in North America (Tally, Athena IE, and One Click LCA). If you've tried all three, all the better! If you or someone in your firm... Read more

Here is a fundamental question regarding measuring operational carbon emissions that I'm sure many of you can clarify for me:  Let's say you are considering design options and you want to know the relative contribution of GWP of adding an additional inch of continuous insulation to the building envelope.  The GWP from embodied carbon will... Read more

The Minnesota CLF chapter’s Specification Subgroup (myself, Andy Marolt/Ryan Companies, Laura Eder/ESG, Java Nyamjav/MSR Design, with input from Annie Perkins/SFI) recently collaborated on a draft set of specification templates incorporating embodied carbon requirements into product performance and action submittals. This work builds on sample... Read more

First, there was Energy Use reductions

Then there was embodied carbon

Soon it will be refrigerant use/leakage calculations

…and much more

As coordinators and leaders of project teams, what does this look like for the practicing architect and our collaborators?

I have no idea. BUT I’m guessing someone is... Read more

Our all-volunteer Advisory Board helps BuildingGreen identify the most critical topics for our coverage, and directs our research as we investigate these topics and bring them to our readers. Their distinguished and varied service in the field of environmentally responsible building is an inspiration.

Checking in to see if any of you have had good job site success with plastic water bottle recycling. Due to the LBC recycling requirements, we have to source separate onsite, and we're trying to has a separate plastics bin. For the most part, water bottles is going to be on of our biggest contributors.

They do, seriously.  They are fine people with tons of information, and without them, all of us Architects would be, well, out of luck.

So, we first want to say THANK YOU to all of our contractor friends who took part in our Contractor Coffee Talk on Tuesday. THAT WAS AWESOME!

We learned things like:

Hi all,

We are looking to study Passive House on a couple small multifamily projects. Our understanding is that WUFI Passive only integrates with SketchUp at this time. Our BIM manager has been trying to find an example of a firm that works in Revit and uses WUFI Passive, to point him in the right direction on workflow. I offered to ask... Read more

Is LEED Online mind-numbingly slow today for anyone else? Or is it just me? I may give up and try again tomorrow. Frustrating as I was hoping to submit a final review today. :(

Preservative treatments extend the service life of wood, but many such treatments are highly toxic, especially to aquatic life.

BuildingGreen-Approved Preserved Wood

Products approved by BuildingGreen use chemicals (commonly borates) that are relatively low in toxicity and have low VOC emissions.

Health and Environmental... Read more

Hi All,

My team member is leaving Webcor, and unfortunately that means we have to fill her big shoes with someone new! I thought I'd reachout here and see if you know anyone of high caliber looking for a Sustainability Manager position? Someone with LEED PM experience preferred, and a bit more technical background with MEP/ZNE ideally... Read more

Welcome to the quiz portion of Measuring Energy Use in Buildings: Do Our Metrics Really Add Up?.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the differences between site energy, source energy, and energy cost.
2. Summarize three ways in which source energy can... Read more

Resilience Resource Database

The Defining and Measuring Resilient Outcomes Working Group has been developing a Resilience Resource Database as a repository for resources related to the topic of resilience in our built environment. 

This database and map are endeavoring to show resources for resilient design across the country to... Read more

https://www.architects.org/awards/sustainable-design-0

All,

My BSA Co-chair, Steven Burke, and I want to make you all aware of the BSA Sustainable Design Awards coming up soon. Please see the above link for qualifications and registration information. This is an award which is attempting to work towards the same stringency, rigor... Read more

Greetings, all:

AIA COTE Advocacy is working with AIA Gov't Affairs to assemble a directory of COTE-friendly AIA Members who are passionate about environmental advocacy and VOTERS in targeted congressional districts. We are organizing in-district meetings after the mid-term elections focused on the members of the Senate Energy &... Read more