Hello SCL peeps, 

Thank you to all the people who filled out our 2021 event survey. Your feedback did help us narrow down the options, but it was still inconclusive about whether there’s enough interest in doing an SCL-only Summit. 

To stay on schedule with our planning (and to make sure the event will pencil out financially), we... Read more

This webcast was pre-approved for 1 AIA LU|HSW and 1 GBCI CE hour.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to these organizations. Please check your profile to be sure your... Read more

Ada Fran Maman

Something we seem to be seeing a lot in our market recently are projects split into multiple packages - footing / foundation, C&S, and then later a TI package of CD's... mostly in an effort to speed up permitting and construction schedules. (Oftentimes with a contractor on board for a design / build approach). 

My question to the... Read more

Team,

See this paper regarding outside air vs. filtration.

https://www.sciencedirect.com/science/article/pii/S0360132313002515

MERV-13 is a good way to get most benefits without a huge cost.

Best,
Luke Leung

Hi- Happy Monday!  

Does anyone know if there is an open-source list of manufacturers that have take-back programs? Looking for a summary/spreadsheet with details (costs, qty, etc). I have a small list but I'm guessing there is already one out there...

Also, Doesn't stage D in LCA account for take-back programs? Could this be... Read more

He just posted the following on the Building Performance Knowledge Community forum:

Does anyone have a recommendation for software that is easy to use and relatively inexpensive for doing energy performance analysis at the schematic design (or before) phase?  We are looking for a tool that gives good quantitative comparisons for... Read more

Design assemblies that live up to their potential Course developer Peter Yost explains how high-performance assemblies are fundamentally different from traditional building assemblies.

High-performance buildings integrate site-responsive orientation, climate-responsive form, hefty R-values, efficient mechanical systems, healthy... Read more

Well done and rivhly deserved, brother.  That makes you a Fellow Squared.

All,

Beck is making great strides in our AIA 2030 Commitment and we are looking for an experienced energy modeler to join our team, please reach out if you know of anyone that is looking and has energy modeling experience.  the job is posted on our website:  https://beckgroup.applicantpro.com/jobs/1011136.html

Has anyone submited this credit in lieu of demand response before?  I'm attempting on multiple projects but not sure what to expect review wise or how much confidence to have in the ability to get more than 1 point for trying.

https://www.usgbc.org/credits/gridoptimal-152-v4?return=/credits/New%20C...

Welcome to the quiz portion of Raze or Retrofit? Six Extraordinary Answers to an Everyday Question.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Understand how the embodied impacts of renovation compare to those for new construction.
2. Provide three reasons why building... Read more

Dear Gurus,

At Greenbuild this year I'll be discussing how statistics can lie (in the context of green building claims).  I'm collecting examples of this to prepare.  If any of you know of examples, please send them to me! 

Here are a few of the fun ways statistics might lie that I would be looking for: biased or too-small sample... Read more

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Durability is the first priority for roofing membranes since interior repairs and replacement waste material, time, and money.

BuildingGreen-Approved Roofing Membranes

BuildingGreen approves:

best-in-class TPO membranes from companies that support enhanced heat testing and show proactive attention to performance EPDM products... Read more

This just in from Liz York at CDC: There's a webinar on Friday 11/2 at 3-4 ET on Building Design and Pandemics. For those who signed the petition to WHO urging action on aerosol emissions and have been following the ups and downs of those advisories, this is an especially welcome chance to hear from experts and ask questions. 

Centers... Read more

Built Environment Plus (was USGBC MA- aka Meredith Elbaum's band) has organized this awesome sustainability scavenger hunt.

It's fun. It's easy. Anyone can participate from anywhere - it's all app based, and it's a great way to get energized for Earth Day or week! And it's for a good cause, a fundraiser for supportive organization. Have... Read more