Curious what people's 'best' experiences or recommendations are for load calculations and energy modeling regarding electrochromic glazing... hoping I can lean on others as it's just now becoming more of a talking point in our market here in Omaha. 

Specific questions including whether load and energy modeling software are separate (... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

I'm working on the Best Practice pages, and I want to verify the role of "BITuser experts" (analogous to LEEDuser experts, as shown on this credit page). My questions:

Note that the role of the expert,... Read more

Hi All,

Structure Tone just released their annual Sustainability, Resiliency, and Wellness Report.

Download a copy here.  https://structuretone.com/sustainability/

I’m curious what people think.

The Getting to Zero Forum is happening next week in Minneapolis, Minnesota (my home state!). Anyone else from this group planning to attend in person? I'm especially curious as the Forum comes so quickly on the heals of the Living Future Conference.

As a proud Minnesotan, I have a hard time imagining how anyone could ignore an... Read more

A site license allows your entire organization to access and share the guide, and to keep a copy in your library.  

We’re excited to be releasing the 2020 edition of Spec This, Not That. 

... Read more

Hi all,

Here's a good follow up to Maria's steel question on Monday.  We have a Midwest project that unfortunately (from a carbon perspective) is required to use a traditional, thick precast facade.  We’re working with the contractor and potential future (not yet bid out) fabricators to determine an appropriate % of pozzolanic material... Read more

I invite you to submit a speaker proposal for Gulf Coast Green and plan to join us at the Houston Zoo on March 22, 2024. It's always an inspiring event!

CALL FOR PROPOSALS
After 17 successful years, Gulf Coast Green has proven to be the leading green building conference in the Gulf Coast region.  In addition to a lineup of... Read more

is anyone aware of some guidance about citation protocols for when a person/team/org uses an AI tool to generate some base components for a report (which is then heavily edited by humans)?

I'm inclined to disclose in detail which tools were used and how ... but would love to know if there are some industry protocols shaping up about this... Read more

Welcome to the quiz portion of Better Window Decisions: Mastering the Performance and Cost Options.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand the energy metrics that inform how windows affect energy loads
2. Describe ways to avoid air leakage and condensation... Read more

This are opportunities for us to get involved as design and construction allies with the new administration and the US Department of Energy on more efficient building.

The first link below is for low-carbon projects that will provide the case studies and solutions that the industry can follow.  The second is identifying barriers and... Read more

This webcast was pre-approved for 1 AIA LU|HSW and 1 GBCI LEED-specific CE hour.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to these organizations. Please check your profile to be... Read more

Hi Fellow SDLers: I'm sure you're like me and thrilled at the news of the Senate's passage of the historic climate bill yesterday. And also are likely on pins and needles until it's passed the House and signed into law. What a conclusion of a terrible roller-coaster ride that is our Congressional system.

I'm writing to pass along a... Read more

Dear fellow SCL'ers,

Recently one of our members, Ryan Poole, sustainability leader at DPR, has been facing some personal challenges. His wife is 35 weeks pregnant and was diagnosed with a brain tumor. They have moved across country - from Colorado to South Carolina - to be closer to thier parents and their support system, but they can... Read more

I am looking for example specifications for low carbon concrete to have our structural engineer(s) review and incorporate.  Does anyone have good examples or  link(s) to good examples?

Thanks,

Mark

I am working on a new community development in St. Paul that is striving to achieve net-zero energy. We are able to get there mathematically by using the extra generation on light industrial rooftops to offset medium-density housing energy use (all buildings are anticipated to have different, private owners). However, this puts us over... Read more

Office furniture’s materials and components can come from unsustainable sources, and use adhesives that emit formaldehyde or other volatile compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves tables, desks, and other office furnishings certified to BIFMA’s multi-attribute level 3 standard, which requires low... Read more

The deadline for submitting presentations is coming up. This year ASHRAE is hosting a joint conference with Simbuild. We are just about to send out an extension announcement (It is now Feb 9th) , so there is still time to get an abstract for a presentation. 

Possible ideas for topics: 

Daylight - new metrics and... Read more

Hello!

As perhaps one of the newest members, I wanted to take a moment to say hi.

I have recently joined Lois Vitt Sale at Wight & Company and look forward to engaging with the group.

Like many of you, my interests and work tend to span a wide range of topics – a necessity as we approach the complexity of today’s... Read more