Ground- and water-source heat pumps move refrigerant or water through the ground or a body of water for use as a heat source (for indoor heating) or heat sink (for indoor cooling).

BuildingGreen-Approved Heat Pumps

BuildingGreen approves:

Does anyone have experience pursing SITES certification on an essentially a zero-lot line project?

We are required to achieve silver certification, but the project scope/phasing recently changed and the entire site/parking area was eliminated and we no longer have a green roof. It still appears we can meet silver certification as so few... Read more

For my first test post I'm going to be completely boring and ask about logistics.

If we know of someone that should be part of this forum, how do we invite them? There were a couple of people that I thought were on the Wiggio who I recently found out were not. There may also be folks from our regional groups who may not have been part... Read more

The Center for the Built Environment (CBE) at the University of California, Berkeley is conducting a survey to understand current practices and outlooks among design practitioners: architects, engineers, energy modelers, and related professionals. Our goal with this work is to improve climate change adaptation guidelines that support building... Read more

I wanted to make sure that you didn’t miss this fun event.  We can all use some fun right now.

Built Environment Plus is celebrating the arrival of spring with a fun competition to get people out and about safely. A digital Scavenger Hunt will allow teams of 4 (or larger families) to complete a series of photo, video, and text missions... Read more

Greetings to the Green Commons!

Those of you who attended Greenbuild may remember that during one of the keynotes, Ali Zaidi - White House National Climate Advisor, announced that the White House was developing a definition for "Zero Emissions Buildings" (here’s a [LINK] to a related Washington Post article). The draft language for the... Read more

Hi all,

I am working on a Div 01 sustainability spec section for our firm to include by default on all projects. I've been finding a lot of great sample language out there for embodied carbon measures and material transparency (huge thanks to anyone here who had a part in developing those resources). 

One thing I'd like to include... Read more

Hello All-

  We have a K-12 school project that is using a R-60 flat roof assembly as an energy & costing benchmark (along with other energy efficiency measures but this is the relevant detail to our question).  The project mechanical engineer is not onboard with a number of our energy conservation measures and has been sharing... Read more

Hi Fellow SD Leaders: This webinar from the AIA and the Building Resilience Coalition looks highly relevant and with some great speakers. It's free and open to all (I think...not sure how AIAU works for non-members.)

Free climate change risk webinar 10/23

Join members of 52 organizations of the Resilience Building Coalition for... Read more

I am getting started on a research project to evaluate the feasibility, costs, and benefits of using phase change material (PCM) to passively regulate temperature in Minnesota buildings. If anyone has experience designing with PCM, installing PCM, or occupying buildings with PCM, can you share any lessons learned that would be relevant as... Read more

(posting here for Kira)

Sustainable Design Leaders:

Is your firm using the AIA COTE Top Ten Toolkit in some fashion? COTE would like to hear from you, especially if you are willing to share your story. 

Specifically, we'd like to share best practices and lessons about how it is working (with certain types of projects, at... Read more

Team,

You probably know on July 9th, WHO issued a document and agreed aerosol route of COVID-19 transmission is possible, but fell short of saying we need to make provisions in our buildings for it per the "Do no harm" principle.  Mary Ann Lazarus, Pauline Souza, Kay Sargent, Joyce Lee, and I (SDL members from architecture and... Read more

Welcome to the quiz portion of Getting Flame Retardants Out of Foam Insulation.

Learning Objectives
Upon completing this course, participants will be able to:


1. Summarize why and how flame retardants are used in foam insulation.
2. Elucidate the case for taking the chemicals out of foam insulation.
3.... Read more

Board insulation has good thermal performance ranging from about R-4 to R-8 and is used as an integral part of a building envelope’s continuous insulation system.

Because board insulation is used on the building exterior, it is not always subject to the same material health and emissions requirements as batt insulation used inside the... Read more

Welcome to the quiz portion of Essential Playbook to Managing LEED Construction.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Understand the transition from LEED BD+C or ID+C v4 to LEED v4.1, especially in regard to material-related credits.

2. Discern how to properly... Read more

I'm happy to announce the Call for Presenters for this year's Gulf Coast Green, taking place in Houston May 17th.  Our theme is Crossroads: Inclusive Exchange.  We are especially seeking presentations that focus on how design can engage the community and foster social bonds and social justice.  I’m sure many of you have work that is relevant,... Read more