Hi Everyone,

Who has worked on a SITES certification and can share the approximate hours involved for administering and completing documentation? A relative sense of the effort compared to LEED would also be helpful, similar to the thread about WELL on this same subject. 

Appreciate any insight. Thanks! -Hilary

Hi Green Friends - I hesitated to post on April Fools, but wanted to get the link out for folks to share with their netowrks    I'll be teaching a workshop at the Pacific Energy Center on May 11 on Electrification Retrofits of Exisitng Non-Residential Buildings.  I'll be bulidng on the great work our sub-committee led by Allison has been... Read more

Hi everyone, it was so great to meet some of you at the winter summit and finally connect names with faces!

We have a project that is targeting CalGreen Tier 2 and LEEDv4 Platinum.  Thought I'd reach out to see if anyone on this forum has found comparison guides between the two?  Looking for something similar to this CalGreen 2013 tier... Read more

In order to successfully contribute to a LEED project, it is important to have an understanding of how the LEED process integrates within a typical design and construction schedule. Every new construction or renovation project, whether large or small, moves through certain project phases beginning with design development, design completion (... Read more

Welcome to the quiz portion of Equity in Design and Construction: Seven Case Studies!

Learning Objectives
Upon completing this course, participants will be able to:


Welcome to the quiz portion of A Guide to Selecting Sustainable Textiles.

Learning Objectives

Upon completing this course, participants will be able to:


Recycled plastic paneling is an appropriate use for some of the various post-consumer plastic materials entering the waste stream—in particular, high-density polyethylene (HDPE) from milk and detergent bottles.

BuildingGreen-Approved Panels

BuildingGreen approves plastic paneling products with high recycled content—in some cases... Read more

Hi,

We have a market-rate housing highrise project that is going through VE right now: we need cheaper/lighter rainscreen claddings than precast concrete or GFRC.

If you've gone through this similar exercise, I would greatly appreciate recommendations for cladding manufacturers/products with EPDs available. We are open to metal... Read more

I wanted to make sure that you didn’t miss this fun event.  We can all use some fun right now.

Built Environment Plus is celebrating the arrival of spring with a fun competition to get people out and about safely. A digital Scavenger Hunt will allow teams of 4 (or larger families) to complete a series of photo, video, and text missions... Read more

Team SCL,

This was a tough week. My husband coined a phrase "20% laid off."

Unfortunately, 50% of our business is currently impacted by governmental orders stating that our work is non-essential. This is bitter-sweet. I certainly want people to be safe, but we've had to make some tough decisions and in the geographies that were... Read more

Hello Green Gurus!

Here are the details for the next Peer Networks Webinar (happening next week!): Don't forget to REGISTER HERE!

Define and Contract for Building Performance Simulation Services Using ASHRAE Standard 209
Thursday, February 13, 3pm EST (12pm PST)

ASHRAE Standard 209-2018 “Energy Simulation Aided Design... Read more

I read a very misleading article on the AIA's website today regarding antimicrobials and the benefit of microbicidals in paint. It was written by a manufacturer, not a healthcare professional, and was not obviously labeled as sponsored content on the website. (I received the link in an email, which did label it as such).

https://www.aia.... Read more

EDITED LINK

Hello, below is a link to our newly uploaded research report, Embodied Carbon in Commercial Furniture. This new research report introduces a case study and some new baselines for measuring the carbon footprint of commercial furniture, to add to a growing body of work on this topic among our peers:
Embodied Carbon in... Read more

Hello All,

A group of us (three architects and a builder- sounds like there should be a joke here) were debating this and we  are stumped.

Application: Residential exterior trim.

50 year warrantied composite product of agricultural byproduct with PVC (EPD not published yet) vs 100 year (if primed on all sides and painted or... Read more

I wanted to alert you to this opportunity to help develop a new ASHRAE Standard. They are especially looking for people who have not served with ASHRAE previously (aka the usual suspects)

ASHRAE Standard 242P, Standard Method for Calculation of Building Operational Greenhouse Gas Emissions

1 Purpose: This standard provides a... Read more

We're expanding the capacity of our team, with two positions, a general project sustainability specialist as well as a more targeted position focused on the healthcare sector.

Healthcare Sustainability Specialist

Sustainability Specialist

In both cases, we're looking for smart, experienced people who understand the power... Read more

Hi GGs,

We are looking to do a renovation of a very leaky old office space, and we want to get a good snapshot of air quality and effective envelope R values both before and after.

Does anyone have experience with:

1. installing heat flux sensors on windows and walls

2. deploying IAQ measurement devices that can log... Read more