Protection against corrosion is the primary function of steel coatings, which often contain corrosion inhibitors, volatile solvents, heavy metals, and other hazardous chemicals.

These coatings are specified when steel is used structurally, outdoors, or in high-use areas. In these situations, hazardous coatings are often applied off-site... Read more

If you use the mindfulMATERIALS library to easily access material transparency documentation (if not, check it out!), please take 5-10 mins of your time to fill out this quick survey and help guide the future of the library.

The mindfulMATRIALS Collaborative is an industry-led initiative, visit www.mindfulmaterials.com to learn more. ... Read more

If only a few of the Best Practices will have checklists, which will be included under the "Implementation Toolkit" tab, I'm thinking we can simplify them (compared with LEEDuser).

I've attached a screenshot of a LEEDuser checklist. But I don't think BITuser will need the four types of icons, and the legend will take up more space than... Read more

Gather with the Changemakers in Sustainable Construction

You are invited to join BuildingGreen and your peers for the Summit that has always delivered on driving our movement forward. Over three days of collaboration, workshops, learning, sharing, networking, and socializing, we’ll set the agenda for changes to LEED v5, strategize on... Read more

People tracking pollutants and dirt into buildings can cause indoor environmental quality (IEQ) problems, increase maintenance costs, and reduce the life of the floor. When they track rain and snow on hard surfaces, it increases the risk of personal injury due to slips and falls.

BuildingGreen-Approved Track-Off Systems

... Read more

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

Friends,

As some of you know, I joined Perkins Eastman last year and it has been amazing. After years of being the Sustainable Design Leader at my last firm, this move has meant I can concentrate on project work because we have such an AMAZING team, led by Heather Jaurequi and Tanya Eagle. Unfortunately, that also means I'm not in the... Read more

Hey Peer Network! Curious, if we can crowd-source a solution here for the pervious pavers at our Omaha office (climate zone 5A). Apparently over the years we've tried to add different kinds of fill here (gravel) but it keeps... disappearing. Any recommendations with either a replacement product or fill item? 

***Cross-posting this from SCL Group***

Last year I was approached by Green Advantage, remember them from like 2005? There has been a LEED innovation credit for as long as I can remember.

Has anyone seen employed Green Advantage recently? Is anyone asking for it?

Do you see value in GCs/CMs/trades having this training... Read more

Hello all,

This month's SCDL call was full of great discussion! We decided this month that we are feeling good about where we are for the Task Force Agreement on defining social sustainabiltiy in our work. The aim is to work with this agreement for a while and see if it holds up as a process framework. There was also interest to invite... Read more

Hi Carbon Working Group,

It’s been a while since our last online meeting on 3/31 –- admittedly, a bit too long -- so I wanted to share some updates.  You might have seen Candice Pearson’s 5/13 post about the structure of the Contractor’s Commitment and how it’s evolving into a set of guidelines available not only to our SCL Group but to... Read more

Welcome to the quiz portion of How to Build Green At No Added Cost

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Know how to make a value proposition for green buildings.
2. Explain how shrinking a green building and investing in its envelope can reduce first costs of its... Read more

Mithun has a part-time employee Jake Minden who is a graduate student at the University of Washington. Jake is participating in a year-long research fellowship focused on equitable design practice. He has developed a survey to collect perceptions of workplace culture. 

Please consider taking 10-minutes to help gather this valuable... Read more

The IECC is accepting applications for committee members for its development of the 2024 International Energy Conservation Code (IECC). The responsibilities of the committees include:

Reviewing and evaluating public input in accordance with the requirements of the Code Council’s Consensus Procedures, and building consensus to incorporate... Read more

Dear Sustainability Leaders,

During this time of shifting our lives and work to online, BuildingGreen is working quickly to assess the challenges and opportunities regarding the remaining Peer Network Summits for 2020. As timelines continue to be extended for social distancing (and virtually connecting!), we are mapping out the... Read more

You can download the guide here:
https://www.collaborativedesign.org/

And I would ask that any/all of you who find this interesting and useful to please share with your networks. We want it to get distributed far and wide!

- Clark

Hi everyone,

I'm excited to share this report from the 2024 Sustainable Design Leaders Summer Summit.

As usual, this report contains no revealing information that would counter our "safe space" rule so that it can be shared publicly. Feel free to pass it along to anyone interested.

It's hard to capture such a rich event in... Read more