This article just came up in my news feed. I thought you’d all like to read it. I will point out that C&D-specific MRFs have told me that they are really good at single-stream C & D waste, as long as the drywall is pulled out.  Any drywall in a single-stream C & D dumpster ends up in the landfill. Drywall just breaks apart and gets... Read more

I have a client that is very interested in automated shades for a mid-rise multi-family housing project. Do you have any examples of projects that have attempted this? I assume it would involve occupancy sensors and/or an over-rideable default setting dependant on sun position and temperature. I also have an MEP Engineer team that is having a... Read more

Evaporative coolers use far less electricity than conventional refrigerant-cycle air conditioners and they operate without the use of refrigerants, both features that make them attractive for green buildings. However, their suitability is limited to drier climates, and most products use significant quantities of water.

BuildingGreen... Read more

Hi SD Leaders,

As you may be aware, this past April a group of manufacturers calling themselves the Living Product 50 responded to the letters that many of us sent about five years ago advocating for transparency in their product ingredients.  A copy of that letter can be reviewed about midway through the page at this link:  https://... Read more

Hi folks,

Any of you who have completed WBLCA for projects - we are working on a new initiative with the City of Cambridge (building on our prior work NZ Climate Action Plan) but this time focused exclusively on embodied carbon.

We have not yet begun the work - but they have an opportunity to make a move on this on Tuesday and... Read more

Following up on the Decarbonizing Existing Building: Envelope + MEP Solutions Integrative Design Jam, a cohort of us determined a "Decision Making Tree Toolkit" that begins to classify decisions into and "if/then" framework using region, market, climate, scale of intervention, and other factors would be useful in helping us collectively move... Read more

Jenny/Dan:

What types of content do anticipate having in the Documentation Toolkit tab? Here's an example of what we have on LEEDuser:

https://leeduser.buildinggreen.com/credit/EBOM-2009/SSc5#tab-docs (login required)

The layout is a little complicated on LEEDuser, since we had to work with a lot of legacy content, but... Read more

Hi All, 

The rural concrete supplier that is used for most of our projects sources their fly ash from a nearby coal burning plant that is scheduled to be closed in the next two years. In anticipation of this, they are looking into alternative fly ash sources and SCM options and we'd like to provide suggestions.

Does anyone have... Read more

Hi everyone,
The city of Portland recently expanded acceptable certifications for affordable housing projects they provide funding for to include Enterprise Green Communities Certification. Other options are LEED (flavor depends on project size) and Earth Advantage Multifamily, which is a regionally owned and operated certification. This... Read more

Hi everyone,

As part of our monthly SDLS call yesterday, we looked through the 2020 SD Leaders Winter Summit Report. To help paint an even fuller picture of what was covered at that summit, here are slides from many of the 5-minute presentations.

As a note: we have permission from these presenters to share their slides within the... Read more

Sharing the below message from Mike McMeekin, who some of you know, regarding his current initiative, the Engineering Change Lab USA Climate Change Noble Purpose Statement. (Also, here is a Link to today's LinkedIn Updates on this topic.)

Greetings, I am re-sending my email from last week primarily as a reminder regarding the sign-up... Read more

Welcome to the quiz portion of Mind the Gaps: Making Existing Buildings More Airtight!

Learning Objectives
Upon completing this course, participants will be able to:


Identify key performance problems related to leaky building enclosures.

Examine the benefits of making existing buildings more airtight, such as... Read more

We’ve reached the maximum capacity of our venue for the Show-and-Tell next Tuesday at Greenbuild in DC. We also have a full slate of great presentations lined up. Thank you, Perkins Eastman, for hosting!

RSVP is now closed—we're looking forward to a packed house and we won't be able to let folks in who are not on the list.

We can'... Read more

July 29-31, 2020
Chicago, Illinois

Learn more and register

Tuesday, Mar. 17, 11am EDT

Tuesday... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more