Hello Green Gurus,

Here is the information for February's Peer Networks Webinar, A Tale of Two Working Groups: Decarbonizing Existing Buildings & Defining and Measuring Resilient Outcomes. We hope you will join us!

Register HERE

A Tale of Two Working Groups: Decarbonizing Existing Buildings & Defining and Measuring... Read more

Green gurus!

We're getting some interest from clients abroad on two specific materials which we don't have experience with here in the U.S.:

1) Cross Laminated Timber (CLT)

and/or 

2) CarbonCure concrete

Anyone willing to share lessons learned on these material either here in the forum or offline? Or point me... Read more

Has anyone developed a disclaimer to be issued with LCA models and reports? I have been asked to look into developing a disclaimer to be used with LCAs, and unfortuantely I have not been able to find past precedence on this. 

Thank you,

Stephanie Fargas

Hi folks,

The team at DPR Construction has kindly agreed to host a reception and evening of presentations during the AIA Conference in San Francisco. If you'll be in the area, come join us Wednesday, June 7 from 6:00–8:30 for networking and fast-paced sharing of ideas.

The plan is to have a networking reception from 6:00-7:00,... Read more

Last updated October 26th, 2022

What this policy covers

BuildingGreen, Inc. values your privacy. This notice describes what information we collect and how we use it.

To Users Resident in the European Economic Area:  This Privacy Policy will govern use of your personal information if you choose to use any... Read more

Passing on the request from USGBC Regional director:

" Ben Evans who leads our federal advocacy efforts is submitting a Greenbuild Session focused on the opportunities and challenges of the IRA. He is looking for practitioners who can speak to working to utilize IRA/IIJA programs and incentives. He seeks a real estate company/developer,... Read more

I am diving back into Sefaira for the first time in a while, and the program still seems to be missing the ability to account for automatic daylight dimming in energy savings. Previously I had used an LPD reduction equivalent to emulate the savings automatic dimming would provide. Has anyone done a similar work-around? 

Welcome to the quiz portion of Ten Strategies for Growth in a Recession.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand the importance of diversifying.
2. Restate the benefits to doing energy-modeling analysis very early in the design process.
3. Discuss how... Read more

To piggyback off Nathan's introduction where he mentions construction waste management, who is doing anything innovative or different in managing construction waste?  Construction waste has not historically been a passion of mine, but now working in sustainability and construction, I feel like it has to be by default.  

We have a... Read more

I wanted to make sure that everyone saw this.   Next Friday is a launch webinar for the Commitment.

Introducing the Contractor’s Commitment       November 13th, 2020          3pm - 3:30pm ET (12am - 12:30pm PT)

This webinar will mark the launch of the Contractor’s Commitment as a pilot program for 2021. We’ll give a brief overview... Read more

If you’ll be attending AIA24 (or if you live in the D.C. area), join us for the BuildingGreen Show & Tell on June 5th from 6:00-8:30pm at ZGF! This will be a free joint reception with members of US Architects Declare, and it’s open to all Peer Network members. Light refreshments and beverages will be served.

Here is the link to... Read more

Dear SDL community,

I am supporting one of our health authorities in developing a business case for regenerating healthcare infrastructure as part of the indicative design for a new hospital and cancer centre. While I will be deepening this inquiry through the lens of a PhD over the next few (hopefully 4 or less!) years, I - and we - are... Read more

Hello all, there has been a fair amount of discussion about the emerging Cove Tool for early stage energy modelling and parametric optimization at our firm. I am very curious if any of you are using this software, and if so, what are your thoughts about it? 

https://www.covetool.com/

Thanks,

Esteban Matheus

Jennifer is part of the Peer Networks team at BuildingGreen. Her Connections Catalyst role for the Sustainability Leaders networks includes events planning and bringing in new members.

Jennifer’s experience before BuildingGreen includes two years working with AmeriCorps Cape Cod on outdoor environmental projects; a year teaching... Read more

Water and electrical metering and submetering equipment provide valuable diagnostic information and verification of building energy and water usage.

Measuring Water Use

The Alliance for Water Efficiency recommends metering all new connections, retrofitting meters onto existing unmetered connections, and submetering all new... Read more