As with most office furniture, systems furniture can be made from unsustainable materials and use adhesives and finishes that emit formaldehyde or other hazardous compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves furnishings that:

On behalf of the LFRT IRA working group, I am writing to see if anyone has applied for IRA funding (48E, 45L, 179D) for their project, and is willing to share their experiences and basic project info with us.  We can keep the project name confidential if needed.

Thank you!

Now available on demand

As more and more architects, designers, contractors and owners demand transparency surrounding human health impacts in the built environment, manufacturers need short cuts and tools to meet the call of this demand.

This webinar is intended to educate manufacturers about the market demands for creating... Read more

Friends,

We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing.  For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).  

I came across this research paper several years ago, but... Read more

A couple Minnesota cities are considering adding electrification to their sustainable building policy (required for new construction receiving City financial assistance). Concerned that the market isn't ready for a full-on mandate, they are considering a more moderate approach of requiring developers/design teams to conduct an electrification... Read more

Hello all,

I need future weather files for a project. We are looking at three years, 2050, 2075, and 2095 using two climate change scenarios, low emissions, and high emissions. I have seen ARUP's Weathershift site that uses RCP 8.5 and RCP 4.5. Are we assuming that 2.6 is not achievable? I would have used this as a low emissions scenario... Read more

Welcome to the quiz portion of Toxic Chemicals in Buildings: How to Find and Avoid the Worst Offenders (recorded webcast).

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how key health hazards and opportunities for healthier choices vary by product category.
2. List... Read more

Hello all, 

Wondering if anyone has experience with lead limits in electrical cable and wiring? 

LEED for Healthcare allows a limit of 300 ppm of lead in electrical wire and cabling - my search for compliant products has been all dead ends. (MRc PBT Source Reduction - lead, cadmium, and copper)

Acceptable regulations for... Read more

Friends, I reviewed the firm's 2019 AIA 2030 data with a Principal, having organized the data in such a way that we could manipulate it. I included the average EUI and weighted EUI, since the latter gives a truer picture of where we are as a studio. In the past, the assumption was we would raise all boats with efforts to improve our practice in... Read more

Plans are coming together for this Summit! Here's what we know (at least tentatively) so far:

Location:
Chicago, SmithGroup office

Timing: 
July 9-10, 2019

1:00 p.m. start time on 9th, 3:00 p.m. end on 10th

Hi all,

Thanks again to those who presented at the AIA Show & Tell! Here are the slides for some of the fascinating presentations we saw. Please do not share the slides outside of the networks unless they are marked “PUBLIC.”

There may be more to come; if you presented but did not yet provide permission for your slides to be... Read more

Hello! Does anyone know of any general contractors who produce a CSR? Is anyone aware of any general contractors who have an ESG rating? If so, what company is being utilized (i.e. EcoVadis) to get the ESG rating?  

Do you have the authority to start using only EVs in your renderings?  Let’s normalize and accelerate this change!

https://en.wikipedia.org/wiki/List_of_production_battery_electric_vehicles

Why are we showing gas cars in renderings of our green buildings?

The Sustainable Design Leaders group has had awesome, inspiring Summits for ten years now—and there is so much more we can do can to make it a thriving, essential year-round community. To do that we have to extend the trusted “safe space” of the Summits into our online conversations.

And other groups are just getting started on a... Read more

https://www.architects.org/awards/sustainable-design-0

All,

My BSA Co-chair, Steven Burke, and I want to make you all aware of the BSA Sustainable Design Awards coming up soon. Please see the above link for qualifications and registration information. This is an award which is attempting to work towards the same stringency, rigor... Read more

Commercial, institutional, and industrial buildings are the primary applications for large translucent wall and roof panels. Some products offer excellent energy performance while providing daylight into interior spaces.

BuildingGreen approved translucent panels

Due to concerns about BPA (bisphenol-A), BuildingGreen does... Read more