This summit was pre-approved for 10 AIA HSW LUs and 10 GBCI CE hours.

Please complete the survey question to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please first check your profile to be sure your... Read more

Hello, 

I am struggling with understanding if I should be using Annual Marginal Emission Factors (MEF) or Annual Average Emission Factors (AEF) for evaluating different building design decisions.

Everything I know is from this document. So as I understand it ... an individual building or retrofit is going to change the marginal... Read more

Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

Built Environment Plus (was USGBC MA- aka Meredith Elbaum's band) has organized this awesome sustainability scavenger hunt.

It's fun. It's easy. Anyone can participate from anywhere - it's all app based, and it's a great way to get energized for Earth Day or week! And it's for a good cause, a fundraiser for supportive organization. Have... Read more

Fellow SCLers,

This is a small ball item, but I recently had a conversation with a safety glove manufacturer called Traffi. They make PPE, but in particular they have a line of gloves that they promote as carbon neutral. Their organization's operations are offset with retired RECs, but one line of their gloves, LXT, is offset by a... Read more

Hi,

Are any of you attending this conference? Michelle and I are doing this low-carbon concrete/EC policy work and can't attend this conference on short notice - but if YOU are attending - we might ask a couple of small favors (collecting specific info from trade show etc)

AND/OR: if any of you have attended in the past - was it... Read more

A couple questions for this group. I know we're having a Green Commons meeting on this next week. But can anyone comment on the following questions?

-Have you or your firm split the benefit of the 179D with a client? Is this typical?

-Is prevailing wage a requirement for all 179D benefit, or does it follow the same lines as... Read more

All - 

We have corporate clients that are starting to request antimicrobials in response to Covid-19. I assume we are not the only ones seeing an increase in these requests. Knowing that the evidence supporting antimicrobials has limited to no efficacy, how are you approaching these conversations? We want to continue to advise based on... Read more

I've been hearing recommendations for bipolar ionization, as a way to filter airborne virus particles in HVAC systems while avoiding the energy penalty of increased ventilation. However, I've also heard that ionizing equipment is dangerous because it produces ozone.

Does anyone have any insight into the effectiveness and/or cautions... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Whole-building life-cycle assessment (WBLCA) can help project teams reduce embodied carbon as well as many other environmental impacts of building materials. And it’s incentivized in LEED and... Read more

He just posted the following on the Building Performance Knowledge Community forum:

Does anyone have a recommendation for software that is easy to use and relatively inexpensive for doing energy performance analysis at the schematic design (or before) phase?  We are looking for a tool that gives good quantitative comparisons for... Read more

Hello all,

I am reaching out to this community as SMMA has a job opening for a Sustainable Design Analyst (like many of you recently posting job openings on this forum).

Here is the job posting link: https://smma.applytojob.com/apply/mah0aDkOJ0/Sustainable-Design-Analyst

Please note that this position will support... Read more

We are working on a large healthcare project in Minnesota.  We're setting sustainability goals a bit late - no certification, but targets with accountability.  I'm working to determine recycled steel content (for structural steel and rebar), and I've gotten a bit of push-back on recycled content based on being in the region of the Iron Range... Read more

Dear all,

A mechanical engineer on a healthcare project we are working on has asked for help in dividing the ventilation calculations between ASHRAE Standards 170 and 62.1; can anyone here help shed some light on it?

"This is the first time I am working on LEED for a hospital and I am not sure how the template wants me to show... Read more

Welcome to the quiz portion of Deep Material Vetting (That Won't Chew Through Your Design Budget).

Learning Objectives
Upon completing this course, participants will be able to:


1. Align product vetting with goals that aim to mitigate occupant exposure and environmental toxicity.
2. Foster partnerships with... Read more

As with window and glazing products, the energy performance of skylights and roof windows varies greatly among different products and should be carefully considered.

BuildingGreen-Approved Skylights

BuildingGreen approves products that feature advanced thermally broken frames that dramatically reduce thermal bridging and improve... Read more

Is everyone else having trouble with a dysfunctionally slow LEED-Online today (i.e., worse than the usual incredibly slow performance)?