We have a project that is looking for plaster/stucco/textured wall products that are sustainable, or “more sustainable.”

I know these products exist, but I haven’t had to spec or work with any, so I’m reaching out.

The project is in MA, so I'm also soliciting recommendations for products and/or companies who are experienced using... Read more

Hi all, 

The San Francisco Department of the Environment is hoping to gather info from designers and specifiers about construction surplus materials. Their survey is 8 questions total and not limited to those in the SF area. 

Pasting info below if you have a chance to participate! 

Calling Designers and Specifiers:

... Read more

Sitting in SFO after an exhausting but also weirdly refreshing Greenbuild. Saw many of you at the Peer Networks event, which was so awesome!

Before my flight boards, I wanted to let folks know we're seeking a new Editorial Associate. It's pretty entry level with lots of room to grow. If you know a talented writer who's got background in... Read more

On Thursday, September 27 at 2PM Eastern Time you can join the first BuildingGreen Communities webinar where we will share key takeaways from the 11th annual Summer Sustainable Design Leaders Summit (@ the Garrison Institute in upstate New York). Our new webinar format using Zoom will allow for interactive questions and comments throughout. If... Read more

Hi folks,

Our next private webinar is coming right up:

Fusion of Design + Performance: How Payette Was Recognized As AIA Firm of the Year

Tuesday, February 12, 1:00 pm EST

Payette is the first AIA Firm Award recipient to have been nominated jointly by the Committee on Design and Committee on the Environment. Z Smith... Read more

Water and electrical metering and submetering equipment provide valuable diagnostic information and verification of building energy and water usage.

Measuring Water Use

The Alliance for Water Efficiency recommends metering all new connections, retrofitting meters onto existing unmetered connections, and submetering all new... Read more

Hope I'm posting this in the right place.  I have a client who's interested in estimating the embodied carbon of multiple buildings (primarily apartment buildings) they own and operate.  Not sure if I'll have access to drawings or area takeoffs of materials for their buildings.  How would you approach this?  Would appreciate input on resources... Read more

I'm curious who in this group has used ASHRAE Standard 209-2018, Energy Simulation Aided Design for Buildings except Low Rise Residential Buildings?

We've used it internally (minimally) as a reference to help better communicate the goals and activities involved with energy modeling at various phases of design. But it seems like there's... Read more

Hi All,

I just became aware of the attached detail (if I uploaded it correctly) for a project in Portland, OR going out for permit at the end of this week.  Has anyone located the radiant tubing at the bottom of concrete like this before?  It doesn't sit right with me, though I cannot pinpoint exactly why.  Our consultants and the... Read more

Hi folks,

BSR/ASHRAE/ICC Standard 240P, Quantification of Life Cycle Greenhouse Gas Emissions in Buildings, is out for Public Review until March 18. It covers what construction activities have to be tracked and reported and provides placeholder values to use during design. If you have input or suggestions on what would be needed to make... Read more

Dear SDL,

After almost 12 years at Sasaki, I have finally decided to leave for a path slightly-less-traveled. My own development project in Boston (passive house, ZNE condos) is in construction and I will be focusing my attention on that over the course of this year, and then hoping to continue doing similar integrated... Read more

A new article addressing whether PFAS finishes on upholstery fabric actually work (Spoiler alert - they don't) has been published and can be found here:

https://journals.sagepub.com/doi/10.1177/24723444231159856

This is authored by the fine folks at Green Science Policy, Arlene Blum's group that is the source of the Six Classes of... Read more

Welcome to the quiz portion of The Product Transparency Movement: Peeking Behind the Corporate Veil.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe an EPD, naming at least six characteristics that it attempts to quantify.
2. Explain what the HPD Open Standard... Read more

Hello all,

I have a quick question for you. While Energy Star appliances are a no-brainer for projects, I don't see a hard requirement to select Energy Star appliances in the energy prereq/credit. There are references in the water section for water using appliances like ice machines, dishwashers, clothes washers, etc., but no related... Read more

A site license allows your entire organization to access and share the guide, and to keep a copy in your library.  

We’re excited to be releasing the 2020 edition of Spec This, Not That. 

... Read more