BuildingGreen Report

Forum topic

I’m a volunteer member of the ASHRAE 209 ("Energy Simulation Aided Design for Buildings Except Low-Rise Residential Buildings”) Committee.  Are you familiar with ASHRAE 209? It was first published in 2018, and it outlines a process for incorporating energy modeling into the design process. 

From the forward: 

 ASHRAE Standard 209... Read more

Forum topic

Hi Folks - 

The "request for participation" email below is from Brendan Owens, who most of you know was at the USGBC for over 18 years, and is now the Chief Sustainability Officer for the US Dept of Defense. As I read the text, I couldn't help but think of this group as a deep well of expertise and experience that could undoubtedly help... Read more

Campus-wide Group

Reports, Courses, Study Guides, Live Webinars

Tuesday, June 20th 2:00pm Eastern (11am Pacific)

Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon construction, however, may be less familiar. 

Contractors are just... Read more

Forum topic

Hi All,

FSC is working on some exciting new research to help further quantify the carbon impact of forestry management and they are looking for your feedback.  If you are interested in providing your voice or just staying informed of what is happening in this space, please see the details below and register to attend.

FSC Forest... Read more

Basic page

We are no longer accepting reservations for the SDL Winter Summit 2020.

Forum topic

All,

I've probably spoken to a few of you over the phone, but I wanted to make sure all of you know that we are hosting a 4 part webinar series on our Tally LCA software, kicking off tomorrow 10/10. We just released the new of Tally version and ended up doing far more development work than initially anticipated, in no small part due to... Read more

Author

Pierce Quéry, Roving Reporter

Forum topic

What is the status of the roof insulation market regarding non-halogen containing polyiso boards? I know GAF and Atlas still have them. I thought JM had them as well, but seems to have taken them off the menu. Are there performance issues?

Forum topic

Hi Everyone, 

Has anyone had success in finding organizations or programs that will recycle the hard hats? We are looking into options for recycling our expired hard hats that can no longer be used. Ideally, we would want to use a company with facilities across the country but we are open to any suggestions or ideas you all may have.... Read more

Forum topic

Friends,

As some of you know, I joined Perkins Eastman last year and it has been amazing. After years of being the Sustainable Design Leader at my last firm, this move has meant I can concentrate on project work because we have such an AMAZING team, led by Heather Jaurequi and Tanya Eagle. Unfortunately, that also means I'm not in the... Read more

Quiz

Welcome to the quiz portion of Choosing Insulation: Health and Environmental Considerations – Unit 1.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Discuss how insulation works.
2. Summarize how insulation performance is measured and reported.
3. Recount the wide... Read more

Forum topic

Here's the Core Purpose for this group that came out of the Inaugural Summit.

We're off and running!

Forum topic

Hi Carbon Working Group,

It’s been a while since our last online meeting on 3/31 –- admittedly, a bit too long -- so I wanted to share some updates.  You might have seen Candice Pearson’s 5/13 post about the structure of the Contractor’s Commitment and how it’s evolving into a set of guidelines available not only to our SCL Group but to... Read more

Forum topic

Our firm held off from signing the AIA Materials Pledge because it was perceived as a feel-good commitment to promise to have good intentions, with no tracking.  I was pleased to learn yesterday that reporting for signatories of the AIA Materials Pledge would "open" today (July 18) and close August 31, and would include mandatory reporting on... Read more

Product Guide

Hardware has to be durable and resist weathering to ensure that features such as doors function properly.

BuildingGreen-Approved Hardware

BuildingGreen approves hardware that uses post-consumer recycled metal content beyond what is standard in the industry. Products from manufacturers that have engaged in information transparency... Read more

Forum topic

Hello SCL, 

I have a slightly different ask than my usual Contractor's Commitment announcements.

Our newest writer, Elizabeth Waters, and I are researching for a BG article about construction emissions and jobsite carbon for BuildingGreen.com

In particular, we are trying to research how much of a building’s lifetime carbon... Read more

Quiz

Welcome to the quiz portion of An Advocate’s Guide to Resilience Regulations!

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how U.S. municipalities are using codes to improve the resilience of the built environment in the face of worsening climate change.

2. Delineate five... Read more

Author

Forum topic

Here are the links I mentioned at today's meeting:

Timeline:
https://docs.google.com/presentation/d/1RlN4t23uvBtxEzp4QuyqL-w5bqmE4P90...

BG Contacts and Responsibilities:
https://docs.google.com/document/d/1MWYuAEitjk7Zpc8KUNf1LwG3-5wK6sIlgwro...

BITuser Contacts and Responsibilities:
https://docs.google.... Read more