Hi All,
We have a project in design with a large AV display for updating data. Anyone know of an AV team that thinks through both visual /acoustic performance in conjunction with energy use and environmental impact of the display? Replies on the peer networks hub or directly to me at alk@dskap.com work. 

Thank you! 

Welcome to the quiz portion of The PVC Debate: A Fresh Look

Learning Objectives
Upon completing this course, participants will be able to:


1. Catalog the history of PVC in the building industry.
2. Recount the connections between PVC and chlorine, dioxins, mercury, and vinyl chloride.
3. Explain the... Read more

Please see the following invite from Professor Alexandra Rempel at the University of Oregon to participate a 15-20 minute phone/Zoom interview and share your experience and/or perceptions on the problems, challenges, and barriers to incorporating into your projects.

This effort is part of an NSF research grant that I am involved in and... Read more

Welcome to the quiz portion of How Buildings Fail Their Users!

Learning Objectives
Upon completing this course, participants will be able to:


Explain the importance of finding common ground between a client’s project goals and the project team’s sustainability building goals for successful projects that incorporate... Read more

Hi, folks! 

I was recently asked if BuildingGreen could connect prospective speakers to an event organizer in Chicago. Beyond the leaders in the BuildingGreen networks relayed, I wanted to share that the exercise led me to the Women and Climate speaker database: https://www.womenandclimate.co/speaker-database 

When filtering by... Read more

I have a colleague researching existing, proposed, or anticipated changes to urban planning and building codes that encourage lower carbon footprints.

Can anyone comment on or point me to resources on how cities are using carbon footprint analysis and carbon reduction in permitting, now or in the future?

Some specific topics that... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Hi all,

We have a newly constructed, core/shell project having some hot water issues in the core restrooms.

There is a 0.35 Toto lav installed throughout. The hot water heaters are adjacent on each floor, located in the janitor closets. We did the math, and there could be a gallon of water standing and cooling in the pipe between... Read more

Hi there colleagues!

Out of curiosity, do you plan on attending Greenbuild in person in San Diego in September? My staff asked me if we were going and my answer is partially contingent on the extent to which attending would mean getting to see some of our favorite people (read: all of you). Looking forward to taking the temperature of... Read more

Hello everyone,

For those I have yet to meet, I'm Candace Pearson. I've recently rejoined BuildingGreen after a brief interlude at law school and am now getting back into the swing of things with editorial, consulting, and peer networks. 

We had a great turn out at this year's Show and Tell before Greenbuild and all of the... Read more

Hello SCL, 

We’ve heard that some of you have a hankering to connect with this group outside of the Summit and the forum. On prompting by the steering committee, we’ve decided to try out quarterly SCL-only calls focused on a dedicated topic. 

The first of these calls will be Tuesday, April 13th at 4pm ET (1pm PT) and the topic... Read more

CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.

Rainwater capture is increasingly important as shortages put pressure on our water systems.

BuildingGreen-Approved Rainwater Harvesting

We approve a wide range of rainwater catchment and storage systems and components, with... Read more

Hi Everyone - I hope this isn't a repeat topic. We are starting to get familiar with TallyCAT at SAR+ and have a few people testing our projects in it. Is anyone willing to help us troubleshoot or share lessons learned? We're running into a few errors and wonder if our Revit models and workflow are the issue, or if we need to be doing something... Read more

Are you a design or building professional who wants to learn more about sustainability—such as how to do energy modeling, improve the building envelope, or use renewables on a project? Now more than ever, it's time to join the sustainable... Read more

test

It may take hundreds or thousands of years to return to pre-industrial-age levels of atmospheric carbon dioxide, but the loss of animal and plant species that is occurring today is, practically speaking, irreversible. It will take millions of years for evolution to fill the ecological niches being vacated by extinctions and restore healthy... Read more

The AIA has just (finally!) amended the Code of Ethics and Professional Conduct to include new "Obligations to the Public" and  "Obligations to the Environment", that requires architects to advise their clients of their obligations to the environment, obligates architects to promote sustainable design and development, and to implement energy... Read more