Green gurus!

We're getting some interest from clients abroad on two specific materials which we don't have experience with here in the U.S.:

1) Cross Laminated Timber (CLT)

and/or 

2) CarbonCure concrete

Anyone willing to share lessons learned on these material either here in the forum or offline? Or point me... Read more

Welcome to the quiz portion of Deep Dive into the Integrative Process with Marcus Sheffer (recorded webinar)

Learning Objectives
Upon completing this course, participants will be able to:


Pipe that delivers domestic water in North America is typically made from copper, chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX), all of which present environmental challenges. Bimodal polyethylene  (PE-RT) and polypropylene (PP) are potential alternatives with lower climate and health impacts.
... Read more

Hello Green Gurus!

Here are the details for the upcoming Peer Networks webinar, The Beneficial Intersection of Energy, Resilience and Health.
REGISTER HERE! Hope to see you there!

The Beneficial Intersection of Energy, Resilience and Health
April 30th, 2020
2pm - 3pm ET (11am - Noon PT)

How can three... Read more

Hi All,

Attached is the DRAFT of our ZNE Data Report.  It is just the beginning. We have a lot more data to gather.  We didn't want to wait for it to be perfect to get it out. Hopefully this gives you all an idea of where we are headed.  Please continue to send us your projects in the Northeast.  I've also attached the excel doc for you... Read more

Welcome to the quiz portion of Video: Insights to Success on LEED-CI Certification.

Learning Objectives
Upon completing this course, participants will be able to:


1. Identify key changes to LEED CI 2009 (ID+C).
2. Identify the circumstances of a LEED-CI project that challenge the abilityto certify.
3.... Read more

Electrochromic glazing holds the promise of less glare and better energy efficiency with fewer moving parts. The reality is much more complicated and includes information you won’t... Read more

Hello all, there has been a fair amount of discussion about the emerging Cove Tool for early stage energy modelling and parametric optimization at our firm. I am very curious if any of you are using this software, and if so, what are your thoughts about it? 

https://www.covetool.com/

Thanks,

Esteban Matheus

Hi SD Leaders: I'm writing to get your help identifying any experts or projects where all-electric HVAC solutions are being implemented in a large new build healthcare/patient care setting. The client has raised concerns about the reliability of an electric re-heat system and its ability to promptly respond to temperature controls. They also... Read more

Hi all,

HOK has ~75 WELL APs whose credentials will expire in 6-12 months, so we're starting to look into a more robust CMP program.  Do you have great sources of health + wellbeing education, particularly WELL-specific CEUs, that you would recommend (emphasis on free or very low cost)?  We are currently using GBES, BuildingGreen, and... Read more

Pierce Quéry, Roving Reporter

I've been asked to author an article on urban heat mitigation, and I wanted to include a plug for the above pilot credit, which I think is a really powerful new addition to LEED. Beyond introducing the "intent" and "credit requirements", I was also hoping to do (2) things within the article:

1) provide some feedback from those who have... Read more

If you’ll be attending AIA24 (or if you live in the D.C. area), join us for the BuildingGreen Show & Tell on June 5th from 6:00-8:30pm at ZGF! This will be a free joint reception with members of US Architects Declare, and it’s open to all Peer Network members. Light refreshments and beverages will be served.

Here is the link to... Read more

For those who are visiting Chicago, Kira Gould has asked me to spread the word about a casual AIA COTE meet-up. Stop by, meet friends and have a beer.

If you will be in Chicago on November 15, please consider joining a casual meet-up of COTE leaders/members/friends (no fee to join; it's pay-your-own-way at the pub):  

AIA COTE... Read more

Calling all Sustainable Design Leaders - Coming up on March 1st, we’re hosting a virtual SDL check-in. We’ll have a round of five-minute presentations as well as a refresh of the SDL Steering Group.

Quick point of clarification: For those who’ve been around for a while, you may remember this group as the “SDL Regional Leaders”. As we’ve... Read more

Welcome to the quiz portion of The Urgency of Embodied Carbon and What You Can Do About It​​!

Learning Objectives
Upon completing this course, participants will be able to:


Define “embodied carbon” and explain why embodied carbon is a significant source of greenhouse gas emissions, which threaten health and safety... Read more

Sages - see below for what was posted in the SDL forum

seems this topic needs all of you - to guide, critique, move, question

nadav forgive the blend posting but I dont know who sees what, and the SAGES are the bomb on this kind of troublemaking

thoughts all?

PFAS is in everything and you – Please join

Hello... Read more

Hello SCL! We are excitedly planning for a return to in-person SCL Summits. In the past we've scheduled our Summit for the day before Greenbuild, but that day is Halloween and we understand the importance of spending that time with family. We are exploring a January 2023 option for this Summit instead, and are hoping to return to our usual... Read more

BuildingGreen Approved, like its predecessor, GreenSpec, is an independent product evaluation service for BuildingGreen members. We offer an unbiased look at products: BuildingGreen does not accept any manufacturer fees for our evaluations. Here’s a quick tour of the platform and how to use it.