Hello Everyone!

Wondering if anyone has expertise in Algae Photobioreactor facades? Here is a product: https://cellparc.com/

My basic understanding is that they produce heat and biogas (as well as providing shade and some thermal value.)  However, I am not clear on the GHG balance benefit, so to speak.  I cannot determine if the... Read more

We all know the climates are shifting, and the ASHRAE standard that gets invoked for energy codes is shifting along with them--though not in perfect sync.  Louisiana is leaping from ASHRAE 90.1-2007 energy code to 2021 IECC (boom!).  The 2021 IECC as published uses relatively old climate maps; for Louisiana, at least, the same as the 90.1-2007... Read more

Here’s a nice NYTimes op ed on urban density that directly addresses the concern Gwen raised on out call today: 

https://www.nytimes.com/2020/03/24/upshot/coronavirus-urban-density-risks.html?referringSource=articleShare

Has anyone done any museums in which they hired an independent QA/QC specialist? Or perhaps, your firm offers QA/QC services and experise in this area? If so, could you please reach out to me? I'm wondering what firm you used and what your experience was. Was it worth the fee?

There seems to be a slight glitch in that it was posting Seonhee's picture (love Snoopy!) for the post that Duane sent in - is that correctable?

**Just noticed that you can click on the "Edit" tab on the post and correct (e.g. mis-spelled names (Sorry, Seonhee!).**

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Buildings aren’t garbage. But you wouldn’t know it by examining the way the AEC industry works. 

We typically design buildings for a single, limited purpose. We build them partly out of plastics that can’t be readily recycled. We choose diverse materials... Read more

Hi Everyone,

It has been great to see the discussion forum gaining traction as a tool for us all. 

When we met for the first time at Greenbuild last year, we mentioned that one of the goals of the group was to have an annual in-person meeting where we could strategize on how to improve our roles, our companies, and the industry... Read more

Hi SDL: Please see attached letter to USGBC about the urgent need to address climate change in the next iteration of LEED v4. It's based on the realization that in the last few years it has become clear that climate change has become the dominant global threat to humans and our fellow species. And it has also become clear that the steep... Read more

Welcome to the quiz portion of Can We Replace Foam Insulation?

Learning Objectives
Upon completing this course, participants will be able to:


1. List four ways in which foam is environmentally problematic and provide four examples of foam replacements.
2. Discuss the industry's relationship with foam... Read more

Hello, All.  Do we have folks in the group who helped develop Matter - a material management tool?  With its direct connection to Mindful Materials, it would be great to gain some insight from anyone in the know!  https://matterbuild.com/#/landing 

Ventilation fans, kitchen range hoods, and laboratory fume hoods can use significant amounts of energy from both the fan motor and from venting heated/cooled air out of the building—air that then has to be replaced and conditioned by energy-intensive HVAC systems.

BuildingGreen-Approved Ventilation Fans

BuildingGreen ventilation... Read more

Please use this thread for you're actions / ideas for creating more sustainable job site construction office trailers.

I know that Pepper Construction led the way with a Net Zero Construction Jobsite Trailer. (Thanks Susan Heinking!)  Is this a one off?  Any lessons learned? Any one else pursing this?  Is pepper the first and only doing... Read more

Hi SDL!

Our CM recently offered up the possibility of substituting Pozzotive into our structural and paving concrete mix (www.pozzotive.com) on a large public building. Apparently it is on a level with the cost of standard cement.
We are eager to reduce the project's embodied carbon, and this seems almost too good to be true.

Hi all,

I just joined the SDL group and am grateful to have the opportunity to be a part of this awesome community! 

I have an exciting residential embodied carbon research opportunity to share…

Lake|Flato Architects is collaborating as an industry partner with the RE2 Lab and the Hamer Center for Community Design at Penn... Read more

What sorts of boilerplate and legalese will we need on the BIT User site? For example:

I'm not saying you need any or all of those, but I'm just giving a heads-up in case you need to check with your legal advisor.

I can link to those documents from the site footer.

Hey there hive mind,

We went looking through LEEDuser to try and find some direction and didn't find much so I thought I'd bring my team's question here to all of you smart people. We're working on a non-combustion central plant tied to a geothermal field and grid electricity. The project has cooling towers and their associated chemical... Read more