BuildingGreen Report

Forum topic

Hello Sustainable Construction Leaders,

It's come to our attention that although we shared the slides from last fall's all-network Show & Tell in Atlanta, we neglected to include the presentations from the SCL Summit itself. Since we believe in "better late than never," here they are!

As a reminder: we have permission from... Read more

Forum topic

Hello, 

We have recently been introduced to the Innovation Design Consurtium and are considering becoming members. Wondering what others have experienced with this recently created group. Any feedback / experience is most appreciated.

Thanks!

Campus-wide Group

Product Guide

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Quiz

Welcome to the quiz portion of Biobased Materials: Not Always Greener.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Explain why "biobased" is too general a term.
2. List the primary concerns associated with biobased building materials, finishes and furnishings, and wet-... Read more

Forum topic

Hello lovely Green Gurus. Hope you all are well. I am wondering if anyone has installed an indoor sports floor that performed well and is low-emitting. This is for a multi-purpose gymnasium at a community center. Any chance?  Thanks All!

Forum topic

Hi Folks - sorry for the late notice, but I just heard about this two days ago and needed to get confirmation that I could share the request with htis group.

The opportunity is for business leaders in energy, efficiency, construction and design (i.e. all of us!) -

As you know, the flow of the historic federal infrastructure and... Read more

Forum topic

Kristen Fritsch, in the thread about ipe wood, asked about resources comparing the carbon footprint of transporting building materials vs the transport mode.  There are people who spend their lives on this topic that I won't presume to speak for, but I'll share a few observations:

Even though freight transport is something like 7% of... Read more

Forum topic

Peeps, in case you haven't gotten the email blasts--the AIA wants YOU! Now is the time to throw your hat into the ring for volunteering on the following committees/groups: 

2030 Working Group (with Keith Hempel! and Ashley Mulhall!) A&D Materials Pledge Working Group (build on the amazing work Lona Rerick and others have been doing for... Read more

Forum topic

Friends, I reviewed the firm's 2019 AIA 2030 data with a Principal, having organized the data in such a way that we could manipulate it. I included the average EUI and weighted EUI, since the latter gives a truer picture of where we are as a studio. In the past, the assumption was we would raise all boats with efforts to improve our practice in... Read more

Campus-wide Group

Forum topic

Hi friends,

We recently tracked our water consumption on site during the structural demolition of some existing reinforced concrete buildings.  The new OSHA silica regulations required us to keep dust to virtually zero, so we had a bunch of mist cannons and water hoses pumping water around the clock.  We consumed ~855,000 gallons in a... Read more

Author

As BuildingGreen’s Content & Data Wrangler, Fran is a spreadsheet and content-management wiz who:

crunches data for our consulting team’s product vetting works internally and with our education partners to manage our continuing education program supports the editorial team with Drupal magic

Fran also compiles data submissions... Read more

Forum topic

We are working on a tenant improvement and want to determine the embodied carbon on bookshelves, product display cases, and desks. Initially finding that Tally is not reading furniture, casework, or fixture families. Are there any tips and tricks you have found to be successful for modeling or defining FFE items in Revit and quantifying... Read more

Forum topic

Hello SCL members,

A gaping hole has been left since Patty Lloyd stepped down from our SCL steering committee. Don't worry, she is still in the network and tirelessly championing SCL. But this means we are opening up nominations for at least one leadership spot. If you are interested, please email me directly (candace@buildinggreen.com)... Read more

Forum topic

Following up on conversation from the Fika today, Kim said the IRS is supposed to be issuing rules for tax-based (even for orgs that don't pay tax) credits by the end of first quarter.  Sounds like we all just need to be on the look out still.

Forum topic

Hi,

I selected a new background photo for the home page (the previous one was the same as on LEEDuser.com). I found the photo here:

https://www.pexels.com/photo/low-angle-shot-of-building-1029618/

I needed to find something low-contrast that wouldn't compete with the text. I initially tried some of the stock photos... Read more

Forum topic

Good morning all!

We're working on a higher ed project, and the university PM recently read an article about eco-friendly drywall and is interested in using it on the project.  We're currently using the USG EcoSmart drywall on another project and mentioned it as an option, but the article she forwarded also mentioned ExtremeGreen's MgO... Read more