Hi all,

We have a newly constructed, core/shell project having some hot water issues in the core restrooms.

There is a 0.35 Toto lav installed throughout. The hot water heaters are adjacent on each floor, located in the janitor closets. We did the math, and there could be a gallon of water standing and cooling in the pipe between... Read more

Building materials emit massive amounts of carbon long before the lights go on.

In this course, BuildingGreen takes an analytical look at the greenhouse gases that are emitted in the process of constructing our buildings in the first place—the embodied carbon. The report focuses on how architects and designers, working with other key... Read more

Dear SDL: Thanks to all who have already given their support to the AIA Resolution on Urgent and Sustained Climate Action. We're into the final push of getting out the vote to pass the resolution next Wednesday, June 5th afternoon in Las Vegas. This requires 2/3s of the voting delegates to pass. So we're asking anyone who 1) is attending as a... Read more

Protection against corrosion is the primary function of steel coatings, which often contain corrosion inhibitors, volatile solvents, heavy metals, and other hazardous chemicals.

These coatings are specified when steel is used structurally, outdoors, or in high-use areas. In these situations, hazardous coatings are often applied off-site... Read more

Hi all, are there requirements to include/submit backup documentation to the CC excel template? Or is it just the template itself that gets submitted? The question is coming up from our leadership over what documents are public vs internal.

Hi Everyone, 

Has anyone had success in finding organizations or programs that will recycle the hard hats? We are looking into options for recycling our expired hard hats that can no longer be used. Ideally, we would want to use a company with facilities across the country but we are open to any suggestions or ideas you all may have.... Read more

People tracking pollutants and dirt into buildings can cause indoor environmental quality (IEQ) problems, increase maintenance costs, and reduce the life of the floor. When they track rain and snow on hard surfaces, it increases the risk of personal injury due to slips and falls.

BuildingGreen-Approved Track-Off Systems

... Read more

Good morning, All,

Just a bit of news this morning.  My family and I are moving back out west!  I am continuing in my current role with EwingCole, but will be doing so from Portland, Oregon.  Although North Carolina has a been a wonderful place for us for the past 13 years, it is time to be close to family in the northwest and southwest... Read more

Welcome to the quiz portion of Lighting Design for Health and Sustainability: A Guide for Architects​!

Learning Objectives
Upon completing this course, participants will be able to:


Describe how high-quality lighting design dovetails with sustainability by improving energy efficiency and supporting occupant health and... Read more

Hi All,

Has anyone dug into ASHRAE 2016 as part of the new v4.1 requirements or as codes start to adopt it? I recently presented on this and thought I should check my math to make sure I'm understanding and communicating this correctly.

My understanding is that there is a new reference baseline, that is essentially the ASHRAE 2004... Read more

All,

I've probably spoken to a few of you over the phone, but I wanted to make sure all of you know that we are hosting a 4 part webinar series on our Tally LCA software, kicking off tomorrow 10/10. We just released the new of Tally version and ended up doing far more development work than initially anticipated, in no small part due to... Read more

Has anyone found an interior synthetic turf flooring with an emissions test? 

Hello! We are currently working on an LBC Petal project pursuing the Materials Petal. Does anyone know whether H1 lubricants are inherently Red List Free given they are food grade lubricants? We are trying to figure out whether NSF H1 registered lubricants need ingredient reporting or whether the NSF registration works similar to Delcare, RoHS... Read more

It is with the greatest pleasure that I announce to this esteemed group the recognition of our very own and much-loved leader Nadav Malin as an Honorary AIA member. AIA COTE had the honor to serve as Nadav's sponsor and we are pleased and delighted with this outcome (but not surprised of course.) For the record, "The AIA recognizes the notable... Read more

The Sages network is specifically for industry veterans and long-time Peer Network members, including those who are still active with one of the other networks and those who have moved on from that role. This group can help set priorities, drive advocacy, and... Read more

Has anyone completed an LCA for an engineering structures lab, particularly one that has a strong wall and strong floor? 

At the recent All Networks Workshop in Seattle, I listened with interest to some conversation about including sustainability goals, KPI's, critical materials lists, and other related topics on a G-sheet in the drawing set.  This is something I had not previously considered, but would like to learn more about. 

If you work for a design... Read more

Welcome to the quiz portion of Net-Zero Water and More: Moving Beyond “Low Flow”

Learning Objectives
Upon completing this course, participants will be able to:


1. Define net-zero water.
2. Describe the role of utilities in water efficiency solutions.
3. Explain the water-energy nexus and the water-... Read more

Hello Sustainable Advising Leaders,

Happy 2022! Here's your reminder that this network's first monthly call of the year is next Tuesday, January 25 at 3pm ET. Zoom call information is below.

All members of the network are welcome! You can see the agenda here. Here's a quick preview: