Is everyone else having trouble with a dysfunctionally slow LEED-Online today (i.e., worse than the usual incredibly slow performance)?

Welcome to the quiz portion of Whole-Building Life-Cycle Assessment: Taking the Measure of a Green Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define key concepts of whole-building LCA.
2. Recognize the inherent flaws, and potential gains, of whole-building LCA... Read more

I thought some folks here might be interested in a webinar we have coming up this Thursday 12/6 on the topic of best practices for occupant comfort surveys. Although this webinar is part of our Roast launch series, it will be tool agnostic, with information that will be applicable to any occupant survey regardless of tools used. 

To... Read more

For more than 30 years, Alex Wilson has been the most trusted voice on energy efficiency and environmentally responsible design and construction. Since launching Environmental Building News (EBN) in 1992, he’s built a reputation, resources, and staff to provide the foundation for BuildingGreen, a consulting and information company... Read more

Fellow Sages,

I was at an interesting lecture last night. Phil Bernstein (formerly of Autodesk, now at Yale) was speaking (in Lawrence, Kansas, at the U of Kansas) about AI and design/AEC ... you may know that he authored the 2022 book, Machine Learning, about AI and the AEC field. 

Phil has a very interesting posture about AI... Read more

For those of you who are close to CLT and mass timber, has the jump in US wood price also impacted the pricing of CLT on your projects, or viability of CLT compared to the cost of steel or concrete frame buildings?  

If anyone has price data comparing CLT today to pre-Covid pricing or any metric that would describe the percentage change... Read more

We have an environmentally-minded client who asked us to look into an alternative to the blue adhesive film that is typically used to seal uninstalled ducts for IAQ purposes. From a human health and waste perspective, they were hoping to find something that was both plastic-free and reusable. Has anyone tried out other options? I thought it was... Read more

Does anyone have an opinion of Autocase?    https://autocase.com/

I had not heard of this platform before.  Their website says that some firms in the group are customers / users.   Website does not do a great job of describing exactly what they do.  Is there value?

Thanks,

Allen

...for all the folks on the west coast.

It’s smokey out there. For anyone looking for a cheap and relatively effective way to clean your indoor air, here is an article on a DIY box fan filters. 

https://www.texairfilters.com/a-variation-on-the-box-fan-with-merv-13-filter-air-cleaner/

This PSA is from our friends at NEEA (... Read more

Evaporative coolers use far less electricity than conventional refrigerant-cycle air conditioners and they operate without the use of refrigerants, both features that make them attractive for green buildings. However, their suitability is limited to drier climates, and most products use significant quantities of water.

BuildingGreen... Read more

I am still basking in the afterglow of this week's summit, and getting ready to share nuggets of wisdom with my colleagues at our all-staff next week. I was so immersed in the moment that documenting the outlines and choices presented for breakouts slipped my mind. Is there somewhere to access these slides to refresh my memory?

Thanks... Read more

Auto-quiz used for CEUs for attendees of the 2023 SDL Winter Summit.

Avoiding Toxic Chemicals in Commercial Building Projects

We’re excited to issue our special report, Spec This, Not That.

In updating the report in 2020, we engaged a respected toxicology and regulatory-compliance firm to review and assist in our revision of the entire publication. This edition reflects the latest science in... Read more

We had so much fun at our Contractor coffee talk that I reached out to our MEP friends to see if they would set up something similar.  And they have agreed to host a talk on Thursday December 2, at 1-2pm EST.  They will talk about decarbonizing buildings, on a schedule that keeps us under the 1.5° C limit and will also address strategies for... Read more

Hello Green Gurus,

We have an exciting cross-network opportunity coming up next week! Members of the SDL (Design Leaders) and SCL (Construction Leaders) networks will share about their experience at the recent SDL/SCL Summits. We will also preview the Reports for each Summit, and share some news about other events coming up this year.... Read more

Hi all,

The Sustainable MEP Leaders are assembling an industry push to expand the availability of embodied carbon data for MEP equipment. Our first steps are to send a letter to industry announcing a call to action and future educational webinars on the topic, the current draft letter is attached. In a similar manner as the... Read more

Dear All,

I'm happy to announce the Call for Speakers for our next Gulf Coast Green conference, which will take place June 1, 2018 at Rice University in Houston.  The theme is Resilience: Beyond Recovery.  (Harvey, you know).  We absolutely love to have SDL members at Gulf Coast Green, and I know there are several of you who specialize... Read more

The current Stantec/BuildingGreen featured topic is Material Health. Read on to learn the essentials, and then dive deep to earn CEUS.

Also see the Resilient Design featured topic, and also a survey of topics trending in Stantec’s regions.... Read more