Furnaces heat air that is then distributed through ducting and warm-air registers.

Approved by BuildingGreen

Products approved by BuildingGreen include the highest-efficiency, sealed-combustion furnaces and high-efficiency wood or multi-fuel furnaces. A multi-fuel furnace uses several sources of energy such as wood, wood-pellets,... Read more

Good morning all,

I'm new to the forum and I am really happy to be here. For the last year or so, I have been working to advance high performance design at Flad, grappling with so many of the issues discussed in this forum. Especially in the context of recent times, it feels really wonderful to join a group of people dedicated to helping... Read more

All,

I'm looking for a quick methodology to estimate GHG emissions from refrigerants on a per SF basis. Are there any benchmark studies or quick calculators similar to the embodied carbon study? https://carbonleadershipforum.org/embodied-carbon-benchmark-study-1/

Thanks,

Josh

All,

The current version of the program manual includes ID numbers for the best practices, as shown below. I know we want to keep a quick reference number or ID, but though it would be worth asking if we want to use the below, reorder them in some way, or use a different kind of ID. Opinions?

Thanks,
Jenny

--------... Read more

Hello, All!  I'm hoping for your help to keep a green roof on a project of ours.  We have a large healthcare project in the Midwest that is coming in over budget.  To avoid losing our extensive green roof, I'm looking for alternate sources of funding - grants, private sources, etc.  Has anyone gone down this path before and have shareable... Read more

Hello SCL,

Our diligent Contractor's Commitment working group (led by the great Amanda Atkinson) have reviewed a massive amount of feedback and will soon be releasing an updated version of the program (CC 2.0). We will need a majority of the SCL membership to vote YES to adopt the updated version for 2023. 

In advance of the vote... Read more

Welcome to the quiz portion of Green Design: What's Love Got to Do with It?

Learning Objectives
Upon completing this course, participants will be able to:


1. Summarize how designers are better able to fulfill the full promise of sustainability by embracing sensory experience.
2. Broaden the sustainable design... Read more

Hi folks,

We've got another timely and engaging webinar lined up! Join Panama Bartholomy and Peter Rumsey for the latest on electrification policy and applications. (As always, if you can't make it at this time that's ok, we'll be recording it.) 

Register here to get the link: https://www.buildinggreen.com/peer-networks/webinars... Read more

Green Gurus,

Taking advantage of the good stuff that this pandemic is leaving us with, the Boston COTE has gone virtual for its meetings. That means that all of you around the country can join our great program.

Coming up next Wednesday at 2pm EDT (11am PDT, 1pm CDT) we'll have the always inspiring Andrea Love present along with... Read more

Has anyone worked on a project installing a PowerNest system?  I just found out about it today and would love to get working information on it.  

Here's the link, in case its new to you as well. https://www.ibispower.eu/home

Thank you -

Hi Fellow Design Professionals: It would be great if you could participate in this important research on the status of professionals addressing extreme heat.

Thanks.

MAL

Planning for Extreme Heat Survey

Our research team from the University of Arizona and Arizona State University is studying how planning... Read more

Hi SDLers: See the great opportunity to weigh in on the 5th National Climate Assessment at a series of workshops in early 2022. 

Register here:

https://www.globalchange.gov/content/nca5-engagement-workshops?utm_sourc...

Hope all are staying well.

Mary Ann

I’m a volunteer member of the ASHRAE 209 ("Energy Simulation Aided Design for Buildings Except Low-Rise Residential Buildings”) Committee.  Are you familiar with ASHRAE 209? It was first published in 2018, and it outlines a process for incorporating energy modeling into the design process. 

From the forward: 

 ASHRAE Standard 209... Read more

Hi SDL,

I'm heading to Greenbuild next week and one of my teammates who's not attending has asked me to look for expo hall vendors who are involved in Design for Freedom. He's starting up a new project that he thinks could be a good DFF pilot and wants to get some manufacturer contacts. Is there any kind of informal DFF meetup happening... Read more

Hardware has to be durable and resist weathering to ensure that features such as doors function properly.

BuildingGreen-Approved Hardware

BuildingGreen approves hardware that uses post-consumer recycled metal content beyond what is standard in the industry. Products from manufacturers that have engaged in information transparency... Read more

I'm definitely slow on the draw here, but happy to be congratulating you, Allen! What a great recognition of your work as a firm! And I love that the story about it highlights the firm's diversity.

Also worth noting--just 'cause no one here has said it yet--how cool it is that Ed Mazria won the Gold Medal this, and that AIA updated it's... Read more