Hello All-

  We have a K-12 school project that is using a R-60 flat roof assembly as an energy & costing benchmark (along with other energy efficiency measures but this is the relevant detail to our question).  The project mechanical engineer is not onboard with a number of our energy conservation measures and has been sharing... Read more

Hi Green Gurus!

We’ve gotten GREAT feedback and input from many of you via the survey about our planned fall events. You expressed a lot of interest in all the events we proposed: a series of in-depth Integrative Design Jams, separate Summits for SDL and SCL, and regional all-network workshops, starting with one in Boston—so we’re moving... Read more

Older buildings—especially those from the 1950s, ’60s, and ’70s—need our help. Many leave something to be desired in terms of aesthetics and comfort. But the truth is that they are part of the urban and suburban fabric now, and they aren’t going anywhere. As tempting as it might seem to tear them all down and replace them with high-performance... Read more

Thought I'd share this interesting research about something I hadn't considered as another pandemic impact - the use of video in Zoom etc calls vs. audio only. Maybe an excuse to keep your camera off some of the time?

https://www.sciencedaily.com/releases/2021/01/210114134033.htm

MAL

Welcome to the quiz portion of Better Window Decisions: Mastering the Performance and Cost Options.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand the energy metrics that inform how windows affect energy loads
2. Describe ways to avoid air leakage and condensation... Read more

Curious what people's 'best' experiences or recommendations are for load calculations and energy modeling regarding electrochromic glazing... hoping I can lean on others as it's just now becoming more of a talking point in our market here in Omaha. 

Specific questions including whether load and energy modeling software are separate (... Read more

Hi all,

Here's a good follow up to Maria's steel question on Monday.  We have a Midwest project that unfortunately (from a carbon perspective) is required to use a traditional, thick precast facade.  We’re working with the contractor and potential future (not yet bid out) fabricators to determine an appropriate % of pozzolanic material... Read more

Hi All,

Structure Tone just released their annual Sustainability, Resiliency, and Wellness Report.

Download a copy here.  https://structuretone.com/sustainability/

I’m curious what people think.

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Hello all,

Thank you so much for your work on the Contractor Commitment. In preparation for the Summit, we've pulled all of the sections together into one cohesive document. We would like to invite everyone in the SCL network to review and comment on this latest draft so that we can compile comments before Wednesday and make the most of... Read more

Hi GGs,

We are looking to do a renovation of a very leaky old office space, and we want to get a good snapshot of air quality and effective envelope R values both before and after.

Does anyone have experience with:

1. installing heat flux sensors on windows and walls

2. deploying IAQ measurement devices that can log... Read more

We're expanding the capacity of our team, with two positions, a general project sustainability specialist as well as a more targeted position focused on the healthcare sector.

Healthcare Sustainability Specialist

Sustainability Specialist

In both cases, we're looking for smart, experienced people who understand the power... Read more

Hi all!

I'm working on my first energy positive / passive house multifamily building and trying to figure out the trash/recycling chute. I am curious what solutions you have employed to make the trash chute air tight? We have excluded the whole chute from the envelope. Do you use airtight doors (and which ones?) at each floor trash/... Read more

I invite you to submit a speaker proposal for Gulf Coast Green and plan to join us at the Houston Zoo on March 22, 2024. It's always an inspiring event!

CALL FOR PROPOSALS
After 17 successful years, Gulf Coast Green has proven to be the leading green building conference in the Gulf Coast region.  In addition to a lineup of... Read more

Hi All - I have a 3 bdroom close walking distance to Greenbuild venue - but I don't need it.

Last call before I cancel it - if anyone wants it - I can transfer!

Just shoot me an email directly to bb@sustainable-performance.org

Thanks and see you there!