Thank you BuildingGreen for yesterday's fun news and much needed chuckles.  I really appreciated the GOOP article the most! I mean, dare I say, a kegel powered elevator - absolutely brilliant!

If you have not seen the April Fool's edition, take a look at the talent and time that was put into these stories.

https://www.... Read more

Welcome to the quiz portion of The BuildingGreen Guide to Insulation!

Learning Objectives
Upon completing this course, participants will be able to:


1. Discuss how insulation works to increase the energy efficiency and environmental sustainability of buildings; 
2. Explain why certain materials make more sense than... Read more

We are attempting to use Tally on a couple projects and are wondering how others are using the tool in their design process. If any experienced users out there would be willing to have a brief phone conversation I would appreciate it. Thanks

CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.

Excess heat generated by air conditioners, refrigerators, boilers, and water flowing through pipes typically goes unused.

BuildingGreen-Approved Water Heat Exchangers

BuildingGreen lists desuperheating technologies and... Read more

Since the launch of the Contractor’s Commitment in late 2020, nineteen companies have become signatories and many others are using the guidelines as a roadmap for their firms.   Now that the pilot year of the Contractor’s Commitment is complete, it is important to consider if and how the guidelines should evolve to be the most impactful.  Over... Read more

We are evaluating Dynamic Glass - and I have always been a bit timid to use. 

Any thoughts / experience on what we should be aware of?

Thanks!

Hi folks,

We have a really great webinar set up for Thursday, Oct 25 at 2pm eastern. This one is based on the 5-minute presentation from Heather DeGrella at the Summer Summit--our jaws were on the floor when she presented it there, and we were hungry for more.

Sign up here: https://zoom.us/webinar/register/... Read more

Hi All,

I want to share this report, released today, that I and some other folks on Green Gurus have been working on.  The report dispels the myth that Zero Energy Buildings cost more (specifically in Massachusetts) and it goes further, making the case that Zero Energy Buildings are actually great investments.  Take a look, tell us what... Read more

Welcome to the quiz portion of Cladding: More Than Just a Pretty Façade

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how different commercial wall assemblies handle moisture.
2. Know what questions to ask to determine a cladding system's environmental impact.... Read more

Howdy all,

Following up on Emily's post (https://www.buildinggreen.com/forum/aia-2030-zero-tool-vs-cbecs-baseline) on AIA2030, the folks on the steering committee's monthly call thought it'd be a good idea to do a general call for feedback on reporting this year while the bangs and bruises are still fresh. The intent is to compile the... Read more

Hi everyone, 

Thank you so much to the SDL members who attended the Summer 2023 Summit! We had an amazing time with you there. A big thanks as well to the attendees who shared 5-minute presentations during the summit.

Below are some of the slides for the presentations. Please note that we have permission from all of these... Read more

Hi All,

If you have 5 minutes, we would appreciate your input in the Google Spreadsheet (linked below).  If you only have 1 minute, feel free to reply to this forum post and list your the typical equipment vendors you spec on projects.  :)

We're asking each of you to enter your "Top 3" specified vendors for each of the products... Read more

How much does every designer need to know? How to support that basic literacy?

Guiding Questions:

I've been hearing recommendations for bipolar ionization, as a way to filter airborne virus particles in HVAC systems while avoiding the energy penalty of increased ventilation. However, I've also heard that ionizing equipment is dangerous because it produces ozone.

Does anyone have any insight into the effectiveness and/or cautions... Read more

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

All,

Beck is making great strides in our AIA 2030 Commitment and we are looking for an experienced energy modeler to join our team, please reach out if you know of anyone that is looking and has energy modeling experience.  the job is posted on our website:  https://beckgroup.applicantpro.com/jobs/1011136.html

Hello Sustainable Community Design Leaders,

The SDL Winter Summit (Jan 23-25, Tempe AZ) has a few spots still open, so we are excited to invite SCDL members to join! This is an opportunity to plug into the conversations happening in the Sustainable Design Leaders group, plus a possible chance to carve out some in-person SCDL time.