If anyone else has gotten confused going between parts-per-million and percentages (parts per hundred!) for material reporting here's a little infographic that might help. Feel free to use or improve! 

The Sustainable Design Leaders network and Summit events started over 10 years ago, when a group of sustainable designers realized that the struggles they faced and the goals they strove toward were shared by many... Read more

I was wondering if any of you have experience with integrated PVs and/or solar glass. If so, can you could recommend manufactures for each? We are working on a multistory freestanding building in an urban site for a mid-Atlantic city. Because our site and roof area are limited we are looking to maximized the areas where we can generate power.... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

All,

I recently met Sahil Tadwalkar who is a Stanford MS Candidate in Civil Engineering. He and his group are interviewing design and construction industry professionals to understand issues and challenges around specifying and using low carbon solutions on projects. Interesting stuff! I encourage you to contribute by setting up an... Read more

Exterior paints, stains, and primers—particularly alkyds—can have very high volatile organic compound (VOC) levels and can contain numerous chemicals of concern.

BuildingGreen-Approved Coatings

BuildingGreen lists exterior coatings that meet the South Coast Air Quality Management District’s (SCAQMD) VOC requirements of 50 grams... Read more

Hi Everyone - I hope this isn't a repeat topic. We are starting to get familiar with TallyCAT at SAR+ and have a few people testing our projects in it. Is anyone willing to help us troubleshoot or share lessons learned? We're running into a few errors and wonder if our Revit models and workflow are the issue, or if we need to be doing something... Read more

Hi Everyone, 

Has anyone had success in finding organizations or programs that will recycle the hard hats? We are looking into options for recycling our expired hard hats that can no longer be used. Ideally, we would want to use a company with facilities across the country but we are open to any suggestions or ideas you all may have.... Read more

Welcome to the quiz portion of Verifying Performance with Building Enclosure Commissioning.

Learning Objectives
Upon completing this course, participants will be able to:


1. Reason why the enclosure is fundamental to a sustainable building.
2. Explain why energy goals are less likely to be achieved without... Read more

If only a few of the Best Practices will have checklists, which will be included under the "Implementation Toolkit" tab, I'm thinking we can simplify them (compared with LEEDuser).

I've attached a screenshot of a LEEDuser checklist. But I don't think BITuser will need the four types of icons, and the legend will take up more space than... Read more

Hey Peer Network! Curious, if we can crowd-source a solution here for the pervious pavers at our Omaha office (climate zone 5A). Apparently over the years we've tried to add different kinds of fill here (gravel) but it keeps... disappearing. Any recommendations with either a replacement product or fill item? 

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Environmental, social, and governance (ESG) reporting is an increasingly common expectation throughout financial sectors, and the real estate industry is no exception. 

This live webinar with our friend Chris Pyke, Ph.D., a senior vice president... Read more

Has anyone completed an LCA for an engineering structures lab, particularly one that has a strong wall and strong floor? 

It is with the greatest pleasure that I announce to this esteemed group the recognition of our very own and much-loved leader Nadav Malin as an Honorary AIA member. AIA COTE had the honor to serve as Nadav's sponsor and we are pleased and delighted with this outcome (but not surprised of course.) For the record, "The AIA recognizes the notable... Read more

Hi folks,

I know the last thing we all need is another assignment, but I took a look at this survey and it really should be pretty quick. And we've been talking a lot about how we can be better advocates for the things we care about...maybe this is a chance to do that? 

From an email request: 

I am writing on behalf of an... Read more