Old windows can be leaky and uncomfortable, but window replacements are expensive and resource-intensive.

BuildingGreen-Approved Interior Window Panels

BuildingGreen approves interior window panels with robust warranties that are designed to achieve improved thermal performance with both reduced... Read more

Wondering if we can have a dialog on HVAC load calculation software... we are currently still using Trane Trace 700, but with the future migration to Trace 3D+ coming are looking into other options. Never used HAP but I haven't heard great things, and we dabbled in IES VE for a while, but went back to Trace since at that time there was no... Read more

Hi friends, 

Before i forget, here is the checklist I mentioned yesterday that got such a positive response in our office - again it came about after i was asked (for the Nth time) to write a sustainability description for a concept proposal/ RFP that I was not a part of and frankly didn't have a lot going for it. So it's framed as "you... Read more

SDL

Glad to see some of you at the COTE event at our studio last week.

Has anybody heard of this company and technology? https://www.enverid.com

Thanks in advance, Zach

Zach Craun, WELL AP, LEED GA

Associate

COOKFOX ARCHITECTS, DPC

250 West 57th Street

New York, NY 10107

... Read more

Avoiding Toxic Chemicals in Commercial Building Projects

We’re excited to issue our special report, Spec This, Not That.

In updating the report in 2020, we engaged a respected toxicology and regulatory-compliance firm to review and assist in our revision of the entire publication. This edition reflects the latest science in... Read more

For those of you who have attended the event above, I think you will agree this has been a high quality event.  But DFC is changing the forum this year. Instead of holding an annual event in September, this year they are holding 4 half day events around the country.  Attendance will be limited to 40 people and it is focused on sustainability... Read more

Welcome to the quiz portion of Deep Material Vetting (That Won't Chew Through Your Design Budget).

Learning Objectives
Upon completing this course, participants will be able to:


1. Align product vetting with goals that aim to mitigate occupant exposure and environmental toxicity.
2. Foster partnerships with... Read more

Seeking Pros/Cons, Feedback/Commentary about signing the US Architects Declare Commitment. 

https://us.architectsdeclare.com/

Reviewing against the "shoulds" and "shalls" of the 2020 AIA Code of Ethics and Professional Conduct ... and other commitments that are out there ... any feedback welcome.

Tips for how your workflow... Read more

Hello All-

  We have a K-12 school project that is using a R-60 flat roof assembly as an energy & costing benchmark (along with other energy efficiency measures but this is the relevant detail to our question).  The project mechanical engineer is not onboard with a number of our energy conservation measures and has been sharing... Read more

Hi All,

I'm teaching a class this semester at CU Boulder on Zero Carbon Buildings and Cities (a new class that I'm making up as I go). The hardest part, I'm finding, is locating some good materials that cover the basics of energy efficiency for non-building engineers or designers (we are energy and sustainability generalists in this... Read more

Hi folks,

I hope you're all doing well, despite the heat (thermal, political, social...ugh!).

We've had low turnout on the SAL monthly calls lately; it seems that these aren't a high priority for many of you. That's not necessarily a problem, if you're finding value in being in the network for other reasons, that's fine.

We... Read more

Hi everyone,

Just a reminder to please fill out the SDL 2024 Events Attendance Poll by the end of next Monday, December 18th. Thank you so much to those who have filled it out already! :) 

-Amanda

I've been hearing recommendations for bipolar ionization, as a way to filter airborne virus particles in HVAC systems while avoiding the energy penalty of increased ventilation. However, I've also heard that ionizing equipment is dangerous because it produces ozone.

Does anyone have any insight into the effectiveness and/or cautions... Read more

This webcast was pre-approved for 1 AIA LU|HSW and 1 GBCI LEED-specific CE hour.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to these organizations. Please check your profile to be... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

I am looking at having staff members take a materials course and deciding between Parsons Healthier Materials and AIA Materials Matter certificate programs. Does anyone have feedback on either? Bonus points if you know about both and can provide a direct comparison. Thanks!

Would anyone have an example LEED Homes v4 specification they would be willing to share?  We are working on our first LEED Homes project, a midrise low income housing development here in Houston.  We have a LEED Homes provider, but she will not provide the specifications, which seem to be quite different in requirements and submittals from our... Read more

Dear Gurus,

At Greenbuild this year I'll be discussing how statistics can lie (in the context of green building claims).  I'm collecting examples of this to prepare.  If any of you know of examples, please send them to me! 

Here are a few of the fun ways statistics might lie that I would be looking for: biased or too-small sample... Read more