Welcome to the quiz portion of Energy Modeling: Early and Often.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how energy codes and standards are pushing commercial projects beyond what they can do without modeling.
2. Describe the energy and cost-savings benefits... Read more

Green gurus!

We're getting some interest from clients abroad on two specific materials which we don't have experience with here in the U.S.:

1) Cross Laminated Timber (CLT)

and/or 

2) CarbonCure concrete

Anyone willing to share lessons learned on these material either here in the forum or offline? Or point me... Read more

I am wondering how architectural firms plan to close the gap to zero in the next few years. 

Owner's dictate outcomes and the typical owner is not committed to zero - even when sustainability is a focus of the project. 

We can present solar-ready designs, all electric buildings, geothermal, etc. but there is still quite a gap to... Read more

Good Afternoon -

I'm wondering if anyone has a sample project wellness plan or survey that they'd be willing to share?  The 2.0 says additional resources are coming soon but I have a few project engineers that want to help get these going and are looking for a starting point.

You can email me direct if you don't want to post here... Read more

Gypsum is calcium sulfate dehydrate, which is mined or produced as a byproduct of flue gas desulphurization (FGD) from coal-fired power plants. FGD gypsum may contain trace contaminants from coal processing, but not enough to represent a hazard to users. Years ago, some imported products created indoor air quality problems that required... Read more

WELL & Fitwel and beyond.

Guiding Questions:

I can see from the threads that there are at least a few Passive House advocates in this group - I'm wondering about the PHIUS training and certification. Can any who have done it offer an opinion? Is it valuable? Residentially focused? Would it apply to someone in a larger commercial practice? It's an investment of time and $, so I really want... Read more

Hello Green Gurus,

Here is the information for February's Peer Networks Webinar, A Tale of Two Working Groups: Decarbonizing Existing Buildings & Defining and Measuring Resilient Outcomes. We hope you will join us!

Register HERE

A Tale of Two Working Groups: Decarbonizing Existing Buildings & Defining and Measuring... Read more

Team,

https://www.buildingservicesengineersdeclare.com/

See link above, a group of UK building services (MEP) engineers (like us) signed on above, committed to do life cycle carbon (including embodied MEP) in their work.

Are we behind?  Should we match them?  leap frog ahead of them?

Best,

Luke Leung

HGA is collaborating with the University of Minnesota Climate Adaptation Partnership (MCAP) to research how the AE industry is currently using climate projection data, and what they need in order to grow their use of data. MCAP is currently producing a set of dynamical downscaled climate projections for the state of Minnesota and unlike other... Read more

Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon construction, however, may be less familiar. 

Contractors are just... Read more

I am diving back into Sefaira for the first time in a while, and the program still seems to be missing the ability to account for automatic daylight dimming in energy savings. Previously I had used an LPD reduction equivalent to emulate the savings automatic dimming would provide. Has anyone done a similar work-around? 

Hey All,

I wish I could brag about the tremendous success Integrus has had in conducting a robust LCA on every project.  Our goal is to use Tally to conduct a WBLCA on every project, but we are struggling with issues with staff time, project schedules, scarcity of expertise, and not having a streamlined process to produce reliable... Read more

I wanted to make sure that everyone saw this.   Next Friday is a launch webinar for the Commitment.

Introducing the Contractor’s Commitment       November 13th, 2020          3pm - 3:30pm ET (12am - 12:30pm PT)

This webinar will mark the launch of the Contractor’s Commitment as a pilot program for 2021. We’ll give a brief overview... Read more