Greetings!

Ayers Saint Gross is in search of a Sustainable Design Coordinator to join our team. This person is anticipated to sit in any one of our offices - Baltimore; Washington, DC; Tempe, Arizona; or Austin, Texas. Fit and skillset are more important than geography. The position is anticipated as full-time, but if the right candidate... Read more

My colleague, Kira Gould, from the AIA National COTE communications committee, has a great question I am reposting here...

AIA National COTE: In the early 00s, COTE supported an initiative through which we created a Guide to the Green RFP and collected sample RFP language. That now dated guide is no longer findable in our resources and... Read more

We are trying to figure out how we are going to meet the LEED Credit for Building Life Cycle Impact Reduction for the first time.

One approach we're trying out: We're taking the results of our Tally model and looking at potential reductions from low-carbon concrete. However, the problem I am encountering is that when I take some of our... Read more

I am thrilled to announce that our own supreme Green Guru has been elevated to the College of Fellows!  Congratulations Pauline!

Announcements are being made today so don't be shy folks - please share the good news here.

I am excited to share with you the final draft of the letter back to LP50 manufacturers.  The LP50 manufacturers sent their “Closing the Loop on Product Transparency” to design firms earlier this year.  For more background information, please check out Chris Hellstern's original August 20th post on this Green Gurus forum.  When we posted the... Read more

HI All,

Really hoping to get some insight from all you wonderful people on how the Sustainability teams are set-up in your construction companies. As mentioned in my introduction post, I am the first ever Sustainability Engineer hired by my company.....until now all the work was handled by project teams. Which worked for them in the... Read more

Thank you for joining us for this webcast! Please complete the following survey to provide us with feedback and to record the information we need to report your CEUs.

By providing the information in this survey you will enable us to automatically report these CEUs to the appropriate organizations. Everyone attending and seeking CEUs must... Read more

All--

I haven't been part of this group in a while, but I'm excited to have rejoined recently. Some of you know that I joined HMC last year as Chief Impact Officer. I oversee design, sustainability, research, and communications for the firm, which has 300 people in 6 offices in California. We were founded in 1940 with a mission to serve... Read more

Welcome to the quiz portion of "How to Access the Full Power of Biophilia."

Learning Objectives
Upon completing this course, participants will be able to:


Metal windows are used in commercial building because of their durability, low maintenance, and ability to handle wind loads.

BuildingGreen-Approved Windows

Metal windows must achieve an NFRC-certified unit U-factor of 0.20 or lower to be approved by BuildingGreen.

Manufacturers also must demonstrate that their highest-... Read more

What is your favorite, tangible example of an EUI?

I find it easy for individuals to undervalue the power of a single EUI and curious what useful parallel the creative folks in this forum have used to illiterate its compounding value?

Cheers!
DiAnn

Hello friends, Posting this to help out a friend that you all know!

(please reply directly to Kira at her email below) Tx

Dear Gurus, 

I am curating/hosting a panel at CarbonPositive RESET:

DESIGNED FOR CLIMATE: A New Construction Showcase

North & South America: September 8, 2020 | 4:45-5:25pm (PST)

We have a project looking to use Radiant Floors to help with space heating.  I don't have experience with this so I'm looking for any insights.  Pros / Cons? 

This project is a non-profit and is needing to reach LEED Silver minimum.  This is in Washington State.  Thank you for your help.

If your HVAC designers are addicted to the crack that is Trace 700, and knowing that Trane is giving up on that product in the coming year, what loads program are you weaning* them onto?

Asking for a friend:  Have any of you had success in using the Revit plug-in for loads?

*When told that they should use IESVE for loads, our HVAC... Read more

Are you or companies considering joining RE100? http://there100.org/going-100

"Companies joining RE100 make a global, public commitment to 100% renewable electricity.

To achieve this goal, they must match 100% of the electricity used across their global operations with electricity produced from renewable sources – biomass (... Read more

Folks,

In case any of you enjoy the Phoenix weather, I wanted you to be sure to know that our company, Sundt, which is headquartered here is looking for a sustainability director to lead up our efforts. This comes after two years of work and hiring a consultant (Brightworks out of California) to help us prepare and take the next steps. I... Read more

Hello Green Gurus,

Here is the information for this month's first Peer Networks Webinar, Previewing the WELL Equity Rating: a roadmap for advancing DEI. So sorry for the short notice - we had a pileup of tech issues and time off. We hope you can still join us!

Register HERE.

Previewing the WELL Equity Rating: a roadmap for... Read more

Does anyone have any research studies they could share on the effect of construction/renovation noise and activity on employee productivity?  I'm trying to make a case for the measurable negative impacts of having ongoing renovation construction activity in an office environment.  Thanks!