I am looking for case studies/trying to identify buildings using concrete mixes with upwards of 30% replacement of cement by SCMs.  I've been in conversations with some structural engineers who are interested in lowering embodied carbon in upcoming projects, but would like to see examples of where this level of replacement has been successfully... Read more

Hi,

I have a colleague doing research on PCM in several projects. For context in their report, they were wondering if this group has seen any recent increase in application of PCMs in recent years. Is it just in ceilings or other applications? If so, what products are being used? They were having difficulty finding manufacturers other... Read more

Embodied carbon in products and existing buildings. What does LCA tell us about renovation vs. new construction and material choices?

Guiding Questions: 

Hi all,

Here's a good follow up to Maria's steel question on Monday.  We have a Midwest project that unfortunately (from a carbon perspective) is required to use a traditional, thick precast facade.  We’re working with the contractor and potential future (not yet bid out) fabricators to determine an appropriate % of pozzolanic material... Read more

Team,

You probably know on July 9th, WHO issued a document and agreed aerosol route of COVID-19 transmission is possible, but fell short of saying we need to make provisions in our buildings for it per the "Do no harm" principle.  Mary Ann Lazarus, Pauline Souza, Kay Sargent, Joyce Lee, and I (SDL members from architecture and... Read more

This summit was pre-approved for 10 AIA HSW LUs and 10 GBCI CE hours.

Please complete the survey question to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please first check your profile to be sure your... Read more

We have a client for whom we are designing a very high performance manufacturing facility, and they want to communicate their building's performance both dynamically and in real-time within their lobby for guests and staff.

We would like to mine the wisdom of this group to see what recommendations we can muster regarding high quality... Read more

This month on our Sustainable MEP Leaders call we were asked what resources would be suggested for advancing integrative design.

Two books immediately came to mind for me:

How Building Learn, by Stewart Brand

https://en.wikipedia.org/wiki/How_Buildings_Learn

It was many years ago but reading Stewart Brand’s How... Read more

Welcome to the quiz portion of How to Spot Greenwash--A BuildingGreen Webinar.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand the characteristics of quality standards and certifications to help screen out greenwash.
2. Recognize strengths and weaknesses of... Read more

Wellness is key to sustainable design. As more and more clients understand the value of healthy built environments, designers need to understand the various wellness rating systems available, and which would meet the project's goals and needs.

WELL and Fitwel have emerged as the two leading wellness rating systems,... Read more

Hi folks! Our AIA Seattle Committee on the Environment is hosting a series of decarbonization talks that might be of interest to this group. The next one is coming up next Thursday with the University of Washington. 

Details and free registration here: https://aiaseattle.org/event/cote-university-of-washingtons-pathway-to-d...

Does anyone here have a draft spec for low embodied carbon concrete they could share? I see the GSA has a standards sheet with MGWP limits, but we are hoping to actually specify the mix for upcoming projects.

Hi all,

We have an institutional client who has tired of LEED and is instead putting forth EarthCraft Light Commerical as a replacement certification (they like the performance verification & lower cost that ECLC provides).  Has anyone used ECLC? It seemed an odd choice but wanted to hear from others on their experiences. The... Read more

I'm pleased to announce that the AIA Board of Directors has unanimously adopted the A&D Materials Pledge as the AIA Materials Pledge!!!!! The support of so many of you was a key factor in making it so easy for the AIA Board to adopt The Pledge. The Materials Pledge now has 90 signatory firms, including many of yours. Thank you all.  Now,... Read more

Recycled plastic paneling is an appropriate use for some of the various post-consumer plastic materials entering the waste stream—in particular, high-density polyethylene (HDPE) from milk and detergent bottles.

BuildingGreen-Approved Panels

BuildingGreen approves plastic paneling products with high recycled content—in some cases... Read more

Apologies if some of you are seeing this for the second time - on behalf of Frances Yang, Mike Gryniuk and the Carbon Leadership Forum, consider signing on in support of the SE 2050 Challenge for structural engineers. (Yes, there is an option to sign on as a non-structural engineer, in support of the program.)

http://... Read more