Composite windows come in two basic types: fiberglass, and wood/plastic composite.

BuildingGreen-Approved Windows

Fiberglass and other composite window lines have NFRC unit U-factors of 0.20 or lower. Higher U-factors are allowed for products that include significant recycled content.

Manufacturers also must demonstrate... Read more

I received the following email from Naajia at Southface.  I'll be out of town until November 8, but I'll see if there's time for me to address at least the second part before I leave:

A question regarding the BIT-User Forum was brought to my attention by a participant. Apparently when you are posting a question and you pick your location... Read more

We are trying to figure out how we are going to meet the LEED Credit for Building Life Cycle Impact Reduction for the first time.

One approach we're trying out: We're taking the results of our Tally model and looking at potential reductions from low-carbon concrete. However, the problem I am encountering is that when I take some of our... Read more

Hi Sages,

We had a great conversation in yesterday's Sages meeting. We took the long list of ideas that we brainstormed last month and in our March poll when thinking about what we could/should focus on as a group and we did some refining and prioritizing using dot-voting in Miro (once we got the voting technology figured out!). Notes... Read more

The Post-Yost Experience

What better way to follow up the magic of a live presentation from Peter Yost than with 30 free days of BuildingGreen Premium?

Get a free 30 days of BuildingGreen Premium »
No credit card required Peter Yost, relaxing after a long week's work.

SAVE THE DATE: ALL Peer Networks Show & Tell
Tuesday, November 19 | 8pm - 10pm
The Kendeda Building, Georgia Tech | Atlanta, GA

Start your time at Greenbuild on a high note!

Join your Peer Networks Colleagues from SDL, SCL, MEP, SDLS, and SAL for a high energy evening full of lightning round previews of the best... Read more

Discussion groups the user is subscribed to Unsubscribe Change notification settings Find other groups Links to my posts Replies to my posts*

* This gets complicated -- how much should happen on the dashboard and how much should happen in the actual Discussion forum?

Hold off on discussions for Phase 1. What should be here instead for... Read more

There has been a lot of discussion re antimicrobials in this group, so here is a pre-release of this month's article on the topic. It's not an extensive feature, but I hope you find it informative.

Brent

The live webinar took place on May 9, 2019. If you purchased this webinar, log in to access the recording.

In this live webinar on the sustainability of wood construction, we tap the expertise of leaders in the field and look into three main issues:

The importance of certification The complex issue of embodied carbon Wood legality:... Read more

First, special shout out to Carolyn Day from Perkins Eastman for getting permission to use their Pro-zoom account for this Greenbuild wrap-up social session, because...frankly...Greenbuild just wasn't the same without all of you.

So, while we can't be together in person, that doesn't mean we are stuck by ourselves. Grab a refreshment and... Read more

Welcome to the quiz portion of Video: Making the Green Insulation Choice for Your Project.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Discuss how insulation works.
2. Explain why certain materials make more sense than others in particular applications.
3. Summarize... Read more

What a great first day!

Here are the slides from the show and tell presentations last night at SOM's office; everyone who presented with slides has given approval to share them.

Has anyone here performed circadian lighting studies for WELL using rhino/grasshopper (Lark Spectral Lighting)? 

It seems that Lark can only simulate circadian metrics for daylighting, and NOT electric lighting.  Can anyone shed some light on this?  pun intended :)

Are there any other tools out there that would enable us to... Read more

If your HVAC designers are addicted to the crack that is Trace 700, and knowing that Trane is giving up on that product in the coming year, what loads program are you weaning* them onto?

Asking for a friend:  Have any of you had success in using the Revit plug-in for loads?

*When told that they should use IESVE for loads, our HVAC... Read more

This summit was pre-approved for  6 GBCI CE hours.

Please complete the survey question to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please first check your profile to be sure your information is... Read more

All--

I haven't been part of this group in a while, but I'm excited to have rejoined recently. Some of you know that I joined HMC last year as Chief Impact Officer. I oversee design, sustainability, research, and communications for the firm, which has 300 people in 6 offices in California. We were founded in 1940 with a mission to serve... Read more