Hi folks,

I'm looking into lower-carbon pipe options for HVAC and plumbing. The MEP 2040 has slides from a Buro Happold study in 2020 showing PEX to be much lower in embodied carbon than copper, which is unsurprising. CPVC is also a lower-carbon option.

But PVC has its issues and neither PVC nor PEX are recyclable (especially if... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

I have a client that is very interested in automated shades for a mid-rise multi-family housing project. Do you have any examples of projects that have attempted this? I assume it would involve occupancy sensors and/or an over-rideable default setting dependant on sun position and temperature. I also have an MEP Engineer team that is having a... Read more

Hi SD Leaders,

As you may be aware, this past April a group of manufacturers calling themselves the Living Product 50 responded to the letters that many of us sent about five years ago advocating for transparency in their product ingredients.  A copy of that letter can be reviewed about midway through the page at this link:  https://... Read more

We are growing our Design Performance Group at NBBJ! We're looking for two special people right now: a senior sustainable material consultant and a senior energy analyst. Help us design the next generation of healthy, low impact buildings - this is a chance to impact across the scale of our global company and build a better future! Know anyone... Read more

Following the summer SDL summit - we formed a spinoff user group called "Carbon Sync" to discuss Life Cycle and Carbon Assessment tools like Tally and Athena.  We've had three successful calls with folks sharing a couple 5-minute presentations about various studies and explorations.  We have a mix of experience levels - but are collaborating... Read more

All,

Some of my colleagues and I have been working to promote interest in mass timber construction for K-12 builidngs.  As part of that effort we redesigned a large high school using mass timber in lieu steel, and conducted a whole building life cycel assessment to measure the reduction in embodied carbon.  We also conducted a program-... Read more

Hi, folks! 

I was recently asked if BuildingGreen could connect prospective speakers to an event organizer in Chicago. Beyond the leaders in the BuildingGreen networks relayed, I wanted to share that the exercise led me to the Women and Climate speaker database: https://www.womenandclimate.co/speaker-database 

When filtering by... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Glazing connects occupants to the outdoors, but with so many opportunities for air leakage, poor insulation, and thermal bridging, glazing is the primary weak link in building energy performance.

BuildingGreen approves glazing that offers strong energy performance properties for a variety of... Read more

Welcome to the quiz portion of Video: Insights to Success on LEED-CI Certification.

Learning Objectives
Upon completing this course, participants will be able to:


1. Identify key changes to LEED CI 2009 (ID+C).
2. Identify the circumstances of a LEED-CI project that challenge the abilityto certify.
3.... Read more

Electrochromic glazing holds the promise of less glare and better energy efficiency with fewer moving parts. The reality is much more complicated and includes information you won’t... Read more

Good morning all,

I'm new to the forum and I am really happy to be here. For the last year or so, I have been working to advance high performance design at Flad, grappling with so many of the issues discussed in this forum. Especially in the context of recent times, it feels really wonderful to join a group of people dedicated to helping... Read more

Welcome to the quiz portion of LEED vs. Green Globes: A Definitive Analysis

Note: If you are taking this quiz as a member of LEEDuser, please take the quiz here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Highlight the most significant differences between LEED and Green... Read more

I'm looking into using solar shingles as a roofing option for a historic building renovation. Has anyone used them before and have any recommendations? I understand they won't be as efficient as traditional panels, but I'd like to figure out if it would be a worthwhile compromise to discuss with the historic commission, if necessary. Thanks... Read more

We've put together an infographic that offers a brief rundown of a bunch of programs and tools that help firms promote equity. The idea for this came out of the SDL Winter Summit, so thanks to those who were there and pushed us to create this resource!

https://www.buildinggreen.com/infographic/equity

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Are your clients asking you about wellness? You’re not alone. Employee health and wellbeing has been called the ‘second wave of sustainability.’ In this hour-long live webinar, GreenStep Education’s Alex Spilger will walk you through Fitwel certification, including its requirements... Read more

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more