Hi folks,

It was fun going back over all the great conversations we had and pulling them together in this report. Please feel free to share it with anyone--no constraints on that!

Also, we'll have a webinar next Friday based on this report-- March 8 at 2pm eastern:

I'll show the report and share key takeaways from the 12th... Read more

They do, seriously.  They are fine people with tons of information, and without them, all of us Architects would be, well, out of luck.

So, we first want to say THANK YOU to all of our contractor friends who took part in our Contractor Coffee Talk on Tuesday. THAT WAS AWESOME!

We learned things like:

Welcome to the quiz portion of Whole-Building LCA Tools for LEED v4 and v4.1.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Understand the basic goals of whole-building life-cycle assessment, including how it can improve environmental performance and contribute to credit achievement in... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

This webinar took place Thursday, January 12th at 2:00pm Eastern (11:00am Pacific)

Free to premium subscribers ($30.00 for non-premium)

Green building product selection is a mess.

With an overwhelming number of green product... Read more

Dear SDL'ers

After many months of soul searching about my role as a sustainability leader and how to have the most positive environmental impact, I have decided to take a leave from practice to pursue further studies this September. I will be undertaking a two year Master’s degree at the Institute for Resources, Environment and... Read more

On Thursday, September 27 at 2PM Eastern Time you can join the first BuildingGreen Communities webinar where we will share key takeaways from the 11th annual Summer Sustainable Design Leaders Summit (@ the Garrison Institute in upstate New York). Our new webinar format using Zoom will allow for interactive questions and comments throughout. If... Read more

Friends,

We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing.  For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).  

I came across this research paper several years ago, but... Read more

Stone was one of humanity’s first building materials and continues to play an important role in today’s green building industry. There are many stones used in the building industry, but the most common ones used for exterior cladding are limestone, granite, marble, slate, and sandstone.

BuildingGreen-Approved Stone and Masonry Cladding... Read more

Welcome to the quiz portion of The Death and Rebirth of DC Power. 

Learning Objectives
Upon completing this course, participants will be able to:


Explain when and how to integrate DC power into buildings, and the benefits of doing so.

Understand the history and background of AC and DC power in the U.S.

... Read more

We are pursuing sustainability goals (and documentation of those goals) outside of any certification/rating system for a current project.  However, we have set up a criteria list of goals by following strategies/credits from many of those systems (LEED v4 EPDs, SITES v2 threatened tree species, WELL v2 mindful eating, etc.).  This approach is... Read more

Good evening,

I am looking for suggestions to replace"wood" siding at the 25-year-old Lyle Center for Regenerative Studies and as always there is no solution that does it all. There seem to be three main options: wood, composition siding, or fiber cement siding. I am looking for something with low embodied carbon, little maintenance,... Read more

Hello! 

We have several projects that are either pending ILFI Zero Carbon certification or the owner is planning to purchase offsets to cover construction emissions. Thus far, I have not considered this in our corporate footprint reporting. However, we are including A5 emissions whenever feasible and multiplying that performance over the... Read more

Hello Green Gurus,

A close colleague of ours, Frances Yang of Arup, is distributing a survey developed in partnership with the Healthy Building Network (HBN).

The survey asks for which product categories you need more health information. Answers will help inform which product categories HBN next incorporates into its HomeFree and... Read more

Resilience Resource Database

The Defining and Measuring Resilient Outcomes Working Group has been developing a Resilience Resource Database as a repository for resources related to the topic of resilience in our built environment. 

This database and map are endeavoring to show resources for resilient design across the country to... Read more

Hello! Does anyone know of any general contractors who produce a CSR? Is anyone aware of any general contractors who have an ESG rating? If so, what company is being utilized (i.e. EcoVadis) to get the ESG rating?  

Go to your profile, where you will find the TEAM MANAGEMENT section in the left side bar. Click on Team Members.

You can invite up to 9 more colleagues for a 10-person team to start their Premium Subscriber access through the Team.... Read more

Dear all,

For a specific existing building application, we are looking for a half inch insulating glazing unit, preferably with low-e coating. Based on my research, 5/8" seems to be doable (1/8" glass + 3/8" air gap + 1/8" glass) but I'm yet to find a viable 1/2" solution. Have you come across any on your projects? Thanks for your... Read more

Hi All,

Has anyone successfully adopted a Revit to ClimateStudio workflow with their new export tool? Right now we are using cove.tool because it works reasonably well with iterative Revit modeling, but are itching to try a more accurate and nuanced alternative.

Thanks for any and all experiences!
Misha