I wanted to post a reminder for you all that the Sustainable Design Leaders Summit will be kicking off with a Pre-Summit workshop in Seattle July 31st, 9am - 3pm. If you are interested in joining your peers for this workshop, please see the registration link below. Also, if you know someone in the Seattle area that would be good to have in the... Read more

Welcome to the quiz portion of Existing Buildings Are Architecture’s Future!

Learning Objectives
Upon completing this course, participants will be able to:


Hey all,

I got plugged into this group about two weeks before GreenBuild and wasn't able to make it to the summit. I'm still catching up on all the work this group has been doing recently, but I know one of the big ticket items is the SCL Contractor Commitment. 

I've read through the commitment that was posted right before... Read more

Hi all,

Thanks again to those who presented at the AIA Show & Tell! Here are the slides for some of the fascinating presentations we saw. Please do not share the slides outside of the networks unless they are marked “PUBLIC.”

There may be more to come; if you presented but did not yet provide permission for your slides to be... Read more

Good daylighting intentions can end up increasing glare and solar heat gain.

BuidlingGreen-Approved Lightshelves

We look for lightshelves designed to reflect direct sunlight onto the ceiling, turning what could potentially be glare into diffuse, ambient daylight that penetrates deep into the interior of a building.

Energy... Read more

Hello all,

I need future weather files for a project. We are looking at three years, 2050, 2075, and 2095 using two climate change scenarios, low emissions, and high emissions. I have seen ARUP's Weathershift site that uses RCP 8.5 and RCP 4.5. Are we assuming that 2.6 is not achievable? I would have used this as a low emissions scenario... Read more

We broke up into 5 discussion groups by market sector:

Here are the proposed "guiding questions":

Does anyone know of a source for finding the operational solid waste generated by typical building/use types (weight/sf)? I couldn't find anything on LEED, True, or EPA. I found this table but isn't by sq ft for many of hte uses. Waste Generated by Industry and Building Type (wastecare.com)

Welcome to the quiz portion of Getting Flame Retardants Out of Foam Insulation.

Learning Objectives
Upon completing this course, participants will be able to:


1. Summarize why and how flame retardants are used in foam insulation.
2. Elucidate the case for taking the chemicals out of foam insulation.
3.... Read more

Hello all, 

Wondering if anyone has experience with lead limits in electrical cable and wiring? 

LEED for Healthcare allows a limit of 300 ppm of lead in electrical wire and cabling - my search for compliant products has been all dead ends. (MRc PBT Source Reduction - lead, cadmium, and copper)

Acceptable regulations for... Read more

Hey, all. Two questions:

-How do we communicate to you LEED User content that needs to be pulled through to BIT-user pages? Are you all going to assess each BP page for potential articles/topics that will be linked?

-Regarding the forums- is there a way to notify program staff when a forum has an unanswered question? Hoping to... Read more

We have a client who is asking us to design a roughly 10 ksf Wellness Center for PHIUS 2021 certification.  The program includes several high density assembly type spaces - roughly 300 person peak occupant load for the building.  The Criteria Calculator that the architect showed us puts the building peak cooling load at 4 BTUH/sf (3000 sf/ton... Read more

Is LEED Online mind-numbingly slow today for anyone else? Or is it just me? I may give up and try again tomorrow. Frustrating as I was hoping to submit a final review today. :(

Alena Jumplot

Hello fellow SD leaders,

This is a quick note to re-introduce myself to this group. I am a lapsed member from the original tribe of 2008 who has found my way back on a trail of bread crumbs left by Nadav (thanks Nadav!). I'm just glad to be back amongst my people, sharing and learning from you all, as we help each other to get where we... Read more

Greetings,

I posted this a while back on the MEP SDL forum but also wanted to appeal to the broader community.  We need help gathering existing plug/process load data.  We know it is out there!  Two golden stars to Becky Alexander from LHB who reached out to us after this month's meet-up with some useful material.  We need more!  Please... Read more