What is the status of the roof insulation market regarding non-halogen containing polyiso boards? I know GAF and Atlas still have them. I thought JM had them as well, but seems to have taken them off the menu. Are there performance issues?

Hello everyone, Happy New Year! 

I wanted to send a quick note that we have an awesome group registered for the Sustainable Design Leaders Winter Summit 2020 and we still have a few open seats! This is taking place Jan. 29th - 31st, 2020 at The Lodge, Gulf Shores, AL with an exciting Pre-Summit Workshop happening that Wednesday. If you... Read more

Does anyone have a spreadsheet or chart that compares the new Fitwel v2.1 with Fitwel v2.0 ?

I can't seem to find such a thing on the Fitwel website.

I am trying to determine which version-route to take on our "Workplace" project.

Or do you have experience in this that you can relay?

Thanks.

Hi All,

The SMEPL's Embodied Carbon committee has been hard at work developing a letter that calls for MEP equipment vendors to increase material transparency in their products.  As a way of contacting the most widely-used vendors first, we're asking each of you to enter your "Top 3" specified vendors for each of the products listed in... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

I'm working with the AIA Minneapolis chapter on guidance for small firms related to how and when to energy model. A lot of small firms would like to sign the AIA 2030 Commitment (we had 100 in a room in 2022 in a session led by Nadav and Gwen Fuertes). But we have learned that a) they don't have a good way to energy model small commercial to... Read more

As with window and glazing products, the energy performance of skylights and roof windows varies greatly among different products and should be carefully considered.

BuildingGreen-Approved Skylights

BuildingGreen approves products that feature advanced thermally broken frames that dramatically reduce thermal bridging and improve... Read more

Hello Everyone!

Please mark your calendars and stay tuned for more information regarding an All Peer Networks 2020 Summit Season Closing August 10th, 3-5pm ET (Noon-2pm PT).

Register HERE to get it on your calendar! The staff at BuildingGreen are looking forward to planning a fun and engaging cross-network event focused on this... Read more

Greetings from the CARE Tool Team,

We are thrilled to update you on the successful soft launch of the CARE Tool last week at Greenbuild! The online beta was unveiled at a reception hosted by EHDD, AIA COTE, and Architecture 2030 to 300+ people, where attendees got the chance to learn about and explore the tool in a demo room. We... Read more

Welcome to the quiz portion of Better Choices in Low-Slope Roofing.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain life-cycle impacts, health and environmental hazards, and durability of low-slope roofing options.
2. Classify situations for which reflective roofing... Read more

Can anyone point me to a (dream?) resource listing effective R-values of various wall assemblies?  We are trying to find a cost-effective R-40 wall assembly for a one and two story public middle school targeting net zero energy in Oregon.  Referencing Seonhee's "thermal bridging" thread in late April, I used Therm's native drawing feature, but... Read more

Hi folks,

I'm looking into lower-carbon pipe options for HVAC and plumbing. The MEP 2040 has slides from a Buro Happold study in 2020 showing PEX to be much lower in embodied carbon than copper, which is unsurprising. CPVC is also a lower-carbon option.

But PVC has its issues and neither PVC nor PEX are recyclable (especially if... Read more

Hello Sustainable Construction Leaders,

Save the date! The network's next quarterly call is scheduled for 1pm ET (10am PT), Tuesday November 16th. Topic TBD. Steering Group member Emi LaFountain from Turner will be leading the conversation.

Keep an eye on this thread for more details and Zoom information.

Jen

Hi, all. We missed you at the standing check in today. We have a couple of questions for the BG team:

1. What is the timing criteria you need for Best Practice content? We need to back into a deadline on submissions and believe your critical path timing will help define ours.

2. Can you elaborate on what LEED User/BG content may... Read more