Anyone else having this experience? We've got a LEED 2009 Core/Shell project that we've now been contracted to do a fitout within for one of the first tenants. If anyone else has had this experience and is willing to talk with me about how your process for it has gone, I'd be fantastically grateful.

Find me directly at awilson@asg-... Read more

Protection against corrosion is the primary function of steel coatings, which often contain corrosion inhibitors, volatile solvents, heavy metals, and other hazardous chemicals.

These coatings are specified when steel is used structurally, outdoors, or in high-use areas. In these situations, hazardous coatings are often applied off-site... Read more

Sustainable Design Leaders in NYC

New York City has been discussing implementing PACE Financing for years but has not taken action. Over 48 municipalities in New York State have PACE financing for Commercial (including multi-family) properties, it's time NYC does as well. I recently learned from colleagues in the City that all of the... Read more

Welcome to the quiz portion of Deep Dive into the Integrative Process with Marcus Sheffer (recorded webinar)

Learning Objectives
Upon completing this course, participants will be able to:


Define “integrative process,” understand its role in LEED BD+C v4 and v4.1, and leverage its power to promote advanced sustainability goals... Read more

Hello,

Are you aware of any bldg codes that have included requirements related to Material Health?

Thanks!

Mona Lemoine Architect AIBC, MRAIC, LEED AP BD+C, LFA, Regenerative Practitioner, RELi AP

Associate, Senior Sustainability Consultant

Mobile: 236-878-1752
mona.lemoine@stantec.com

Stantec... Read more

Hi all,

I wanted to reach out to fellow MEP energy modeling teams to assess everyone's experience with the new PCI calculation methodology in 2016. It was a substantial change in how we show savings on projects. Big changes can often come with un-intended consequences. I'm all for pushing to higher efficiency - just want to make sure we... Read more

Hello Green Gurus,

Here’s a reminder that our first Show & Tell for 2021 is happening next week! Monday, February 1st from 7-8pm ET and Tuesday, February 2nd from 4-5pm ET, come see your peers from all networks present for five minutes each on a variety of topics relating to their work.

This event is connected with the Summit-... Read more

If you have a moment and are working in the IAQ arena, please consider filling out this survey, and you could also win an AirGradient ONE monitor. (Check my review video here: https://www.youtube.com/watch?v=NpqYOWLzv7o) 

https://forms.gle/ytLcq2dvtGrD2UZY7

I also have access to the results and will happily share the data whenever... Read more

Welcome to the quiz portion of The Urgency of Embodied Carbon and What You Can Do About It​​!

Learning Objectives
Upon completing this course, participants will be able to:


Define “embodied carbon” and explain why embodied carbon is a significant source of greenhouse gas emissions, which threaten health and safety... Read more

Hi folks, 

A few of us at SERA recently connected with a couple of women in the tech industry who are looking to solve sustainability issues with new software. They're in the "problem definition" phase and are eager to hear from SDL members about the big issues around operational and embodied carbon that we're tackling. See below and... Read more

I am looking at having staff members take a materials course and deciding between Parsons Healthier Materials and AIA Materials Matter certificate programs. Does anyone have feedback on either? Bonus points if you know about both and can provide a direct comparison. Thanks!

Hi folks,

Here's the next Peer Networks private webinar. As usual, it will be recorded and shared in the network if you can't make it in person:

Thursday, July 18, 2pm EDT (11am PDT)

The Center for Active Design (CfAD), operator of the Fitwel Certification System, recently launched Fitwel v2.1, which advances a vision where... Read more

Hi all,

AGC is the biggest umbrella organization for general contractors in the states. To date, there has been practically no interaction between the SCL and AGC. In my mind, the SCL group is the most knowledgeable group of dedicated sustainability professionals out there; so is there a way that we can partner with AGC to collaborate ... Read more

HI All,

Built Environment Plus, a green building member-based non-profit in Boston, is looking for a dynamic person to lead our expansive Education Program which includes courses taught by BuildingGreen and many others in this network. Check out the offerings here: Trainings Archive - Built Environment Plus

This is a critical and... Read more

We are evaluating Dynamic Glass - and I have always been a bit timid to use. 

Any thoughts / experience on what we should be aware of?

Thanks!

test