For those who haven't heard yet, we've reached a critical milestone with the Contractor Commitment. 51% of the SCL network voted to approve the language of the current draft. That's the mark we needed to hit, so we can move forward with planning the launch! Thank you to all those who have worked tirelessly over the last two years developing... Read more

Welcome to the quiz portion of Deep Material Vetting (That Won't Chew Through Your Design Budget).

Learning Objectives
Upon completing this course, participants will be able to:


1. Align product vetting with goals that aim to mitigate occupant exposure and environmental toxicity.
2. Foster partnerships with... Read more

Wood was the first material used in window frame and sash construction, and it remains popular for homes with its warm feel and relatively high energy efficiency.

BuildingGreen-Approved Windows

Wood windows must achieve an NFRC-certified unit U-factor of 0.22 or lower. Manufacturers also must demonstrate that their highest-... Read more

Hi folks,

We often hear from you with a suggestion of someone who would be great for the network, and a question about how to refer them. We've now made that easy, with three steps laid out in an Outreach Toolkit that's posted in the left margin of the Member Directory.

So, if you're thinking of someone to invite or come across... Read more

Hi Everyone!

Does anyone have a good resource for whole-building embodied carbon benchmarks broken down by building use and building category (structure, foundation, envelope, interior)?

I know of CLF’s 2017 Benchmark Study (great resource!) and the One-Click LCA study on European Buildings but are there any others?  I know many... Read more

Nice brief article on how to talk to clients about materials transparency. It was the right level of information to send out to the office at large. Kudos to Lona and Ralph for your contribution.

https://www.aia.org/articles/210821-how-to-talk-to-clients-about-materials-tran

Hello All,

Through a regional School of Architecture, our firm has been connected with a very intriguing startup that has been engineering a new rooftop wind energy technology. They are developing a system to economically capture the increased wind flows at the edges of commercial building rooftops. They have engineered this system,... Read more

Hi everyone,

I am writing to let you know about a change we are making here at BuildingGreen. We will be changing the name of this all-Peer Networks forum “Green Gurus” to “Green Commons.” 

We’ve made this decision after learning that using the term “guru” outside of its cultural context is appropriative. In an effort to center... Read more

Received answers from below questions from NIST Andy Persily

1. Is there a preferred bookends range of CO2 for both “optimal” energy and human performances?

Andy: No

2.Is the ASHRAE ventilation of 1000-1200 ppm average, probably not based on performance, suggesting current ventilation rate is sub-optimal with cognitive... Read more

Hi,

I believe a while back there was communication about a hard hat recycling program. Does anyone have any information about a hard hat recycling program? The contractors in the midwest have finally switched to the new style of hard hats with the chin strap and are requiring all subcontactors to comply by July 1, 2024. I'd like to... Read more

In order to successfully contribute to a LEED project, it is important to have an understanding of how the LEED process integrates within a typical design and construction schedule. Every new construction or renovation project, whether large or small, moves through certain project phases beginning with design development, design completion (... Read more

Hi all,

I have asked a few of you in this list, but thought I might expand the question to the wide group.

To ensure that your firm will be able to collect post-occupancy energy data from your completed projects, have any of you included language about sharing energy data during operations in an owner agreement/contract? We have... Read more

Hello everyone,

We are far too often asked to include parking in our buildings (because why shouldn't the average family have 2.1 kids, .8 pets, and 3 cars) and it always grates on me that we are putting so many resources (natural and monetary) into something that is almost certainly single use and will need to be demolished in 30 years... Read more

Wellness is key to sustainable design. As more and more clients understand the value of healthy built environments, designers need to understand the various wellness rating systems available, and which would meet the project's goals and needs.

WELL and Fitwel have emerged as the two leading wellness rating systems,... Read more

Hi All,

I try to respect this forum and limit sharing events to the ones that are extra exciting and this is one of them. Coming up on May 20th 4-6pm,  Built Environment Plus (formerly USGBC MA) is launching our Building Tech Forum v2.0 Series.  Here's the link to register: https://builtenvironmentplus.org/building-tech-forum-2020/

Posting at the request of Sara Bayer of Magnusson Architecture and Planning, who will soon join this group:

"In our quest to achieve Passive House EUI levels in all of our multifamily projects in a healthy manner, we are encountering pushback on the one item that is not really code min just yet (in NYC) and adds real cost:  ERV’s.  Our... Read more