Hello Colleagues,

You all know our industry’s progress over the past decade related to the impact of materials. We have come a long way. Today we have over 110 firms that have signed onto the A&D Materials Pledge, pledging to a holistic approach to materials considering: Human Health, Climate Health, Ecosystem Health, Social Health... Read more

Since starting at LPA last fall, the number one question I get from people outside the firm is how we are hitting (2018-2019) or getting so close to hitting the 2030 Commitment goals. 

Here is a chance to see for yourself! LPA is seeking a Sustainable Design Specialist to join our RED team (Research Education Design) - location open to... Read more

...for all the folks on the west coast.

It’s smokey out there. For anyone looking for a cheap and relatively effective way to clean your indoor air, here is an article on a DIY box fan filters. 

https://www.texairfilters.com/a-variation-on-the-box-fan-with-merv-13-filter-air-cleaner/

This PSA is from our friends at NEEA (... Read more

Has anyone done inherent bias training in their firm, and if so, how'd it go? Do you have someone you'd recommend as a trainer/facilitator?   Thanks!

Mark your calendars Sustainable MEP Leaders!!
Here are the details to save the date for the 2020 MEP Summit:

Date: June 9th and 10th, 2020
Location: Stantec Office in Denver, CO
Schedule Outline: Tues. 9th beginning with Lunch at Noon, ending Wed. about 3pm

Gather and learn from your peers! Share your challenges... Read more

Hello,

Has anyone come across a rating system 'crosswalk' infographic?

Cheers, Mona

Welcome to the quiz portion of The Four Core Issues to Tackle for Resilient Design (And the Programs That Can Help).

Learning Objectives
Upon completing this course, participants will be able to:


1. Use site-specific hazard analysis to evaluate a project’s resiliency demands.
2. Use climate change data to... Read more

Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

Jason F. McLennan

Hello friends,

Anyone who will be attending NESEA's BuildingEnergy Boston conference next week is invited to an informal Green Gurus meetup! Stop by the Built Environment Plus booth (#4 on the map) at 6pm Monday (during the second half of the trade show reception) to say hi to some fellow Sustainability Leaders. SDL member Keihly Moore... Read more

Many of you have heard me speak of our foundations effort to host a conference in Houston this November that is focusing on the social and economic side of community resilience preparedness. While we purposely are emphasizing these topic areas, we do see the importance of these conversations being witnessed by the design and planning community... Read more

Hi Sustainability Leaders,

(Note: this post was edited to correct Jen's affiliation and to add Rob Winstead.) Please join me and the BuildingGreen team in congratulating the Peer Network members of the USGBC 2023 Class of LEED Fellows!

Geoffrey Brock, IPS-Integrated Project Services, SCL

Heather DeGrella, Opsis... Read more

We are cautiously rekindling the age-old debate: how are we balancing modeling software for design /visualization and performance analysis during early phase of design.  

We are heavy SketchUp users for early design, and most of our staff have access to COVE tool for early performance analysis. Problem is, I’d rather use Revit to COVE... Read more

Does anyone have a recommendation for software that helps organize and track product and material selections for projects? 

Thanks!

I'm exploring the use of phase change material for a project. Specifically, looking at the BioPCM/ENRG Blanket product. I see on their website that ZGF used it at University of Washington. I'd love to hear any feedback from folks who have used it, and more specifically how your energy model and MEP engineer accounted for it. Thanks!! https://... Read more

Stone was one of humanity’s first building materials and continues to play an important role in today’s green building industry. There are many stones used in the building industry, but the most common ones used for exterior cladding are limestone, granite, marble, slate, and sandstone.

BuildingGreen-Approved Stone and Masonry Cladding... Read more

Hi All,

I wanted to share a program of superstars including many of you.  I look forward to electronically connecting and learning together.

Every Monday from June through August, the Boston Society for Architecture (BSA) and the Carbon Leadership Forum (CLF) Boston Hub will present Embodied Carbon 101, a 12-part program series in... Read more